Uniden BCD996XT User Manual page 1021

Settings < UnidenMan4 < TWiki
Set Serial Port
Set the baud rate for the scanner's serial port. Choose from 4800, 9600, 19200, 38400,
57600 , or 115200 bps; select Off to disable the serial port.
Band Defaults
Use this menu to change the default modulation and frequency step or spacing used for
each band. The scanner displays the list of available bands in the following format:
{Frequency} : {modulation type} / {step}
Select the frequency band you want to edit. The scanner prompts you for the following
information:
Set Modulation
Select the type of modulation you want the scanner to use as the default for this band:
AM, Narrowband FM (NFM), FM, Wideband FM (WFM), or FM broadcast (FMB).
Set Step
Select the number of kHz between each frequency or channel step: 5.0, 6.25, 7.5, 8.33,
10.0, 12.5, 15.0, 20.0, 25.0, 50.0, or 100.0 khz.
P25 LP Filter
This setting lets you set the scanner to apply a software filter that removes the 4kHz tone
you can hear on some P25 systems. Note that turning on this setting increases the CPU
load and could slightly degrade P25 decode performance on some systems.
See Scanner Info
This menu lets you see detailed information about the memory and firmware.
% Memory Used
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/CDImage_090515/Manual/Settings.html (5 of 6)5/26/2009 11:16:37 AM