Notification Filter - Cisco 350 Series Administration Manual

Managed switches

Hide thumbs Also See for 350 Series:

Table of Contents

Notification Filter

The Notification Filter page enables configuring SNMP notification filters and Object IDs

(OIDs) that are checked. After creating a notification filter, it is possible to attach it to a

notification recipient in the

Notification

Recipientspage.

The notification filter enables filtering the type of SNMP notifications that are sent to the

management station based on the OID of the notification to be sent.

To define a notification filter:

Click SNMP > Notification Filter.

The Notification Filter page contains notification information for each filter. The table is able

to filter notification entries by Filter Name.

Enter the parameters.

Filter Name—Enter a name between 0-30 characters.

Object ID Subtree—Select the node in the MIB tree that is included or excluded in the

selected SNMP filter. The options to select the object are as follows:

Select from list—Enables you to navigate the MIB tree. Press the Up arrow to go to

the level of the selected node's parent and siblings; press the Down arrow to descend

to the level of the selected node's children. Click nodes in the view to pass from one

node to its sibling. Use the scrollbar to bring siblings in view.

If Object ID is used, the entered object identifier is included in the view if the

Include in filter option is selected.

Select or deselect Include in filter. If this is selected, the selected MIBs are included in the

filter, otherwise they are excluded.

Click Apply. The SNMP views are defined and the running configuration is updated.

SNMPv1.2 Notification Recipients

Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4

Notification Filter

Show Quick Links

Table of Contents