Cisco 350 Series Administration Manual page 312

12
STEP 3
256
• CoS/802.1p —Select a CoS/802.1p value that to be used by LLDP-MED as a voice
network policy. Refer to Administration > Discovery > LLDP > LLDP MED Network
Policy for additional details.
• DSCP—Selection of DSCP values that to be used by the LLDP-MED as a voice
network policy. Refer to Administration > Discovery > LLDP > LLDP MED Network
Policy for additional details.
The following Operational Status fields are displayed:
• Voice VLAN ID—Voice VLAN.
• CoS/802.1p —Value being used by LLDP-MED as a voice network policy. Refer to
Administration > Discovery > LLDP > LLDP MED Network Policy for additional
details.
• DSCP—Value being used by the LLDP-MED as a voice network policy.
The following Dynamic Voice VLAN Settings fields are displayed:
• Dynamic Voice VLAN—Select this field to disable or enable voice VLAN feature in
one of the following ways:
- Enable Auto Voice VLAN—Enable Dynamic Voice VLAN in Auto Voice VLAN
mode.
- Enable Telephony OUI—Enable Dynamic Voice VLAN in Telephony OUI mode.
- Disable—Disable Auto Voice Vlan or Telephony OUI.
• Auto Voice VLAN Activation—If Auto Voice VLAN was enabled, select one of the
following options to activate Auto Voice VLAN:
- Immediate—Auto Voice VLAN on the device is to be activated and put into
operation immediately if enabled.
- By External Voice VLAN Trigger—Auto Voice VLAN on the device is activated and
put into operation only if the device detects a device advertising the voice VLAN.
Manually re-configuring the voice VLAN ID, CoS/802.1p, and/or DSCP from
NOTE
their default values results in a static voice VLAN, which has higher priority than auto
voice VLAN that was learned from external sources.
Click Apply. The VLAN properties are written to the Running Configuration file.
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
VLAN Management
Voice VLAN