Device Authorization Control (Dac); Dac Workflow - Cisco 350 Series Administration Manual

25

Device Authorization Control (DAC)

DAC Workflow

STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
510
Use the Device Authorization Control (DAC) feature to configure a list of authorized client
devices in the network. DAC activates 802.1x features on SNA devices in the network and an
embedded RADIUS server (RADIUS host server) can be configured on one of the SNA
devices. Device authorization is done via MAC authentication.
The DAC workflow consists of the following steps:
Accessing
Activate DAC. See
Configure a RADIUS server device and client devices. See
and Clients.
Add the client devices to the white list. See
Accessing DAC
To access DAC, perform the following:
Click the options menu in the left-hand side of the masthead:
The following menu is displayed:
Select Edit DAC Mode.
DAC.
DAC List
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Smart Network Application (SNA)
Device Authorization Control (DAC)
Specify a RADIUS Server
Management.