IP Configuration: VRRP
Configuring VRRP
STEP 4
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
To see further information about a virtual router, click Details.
The following fields are displayed for the selected virtual router:
•
Interface—The Layer 2 interface (port, LAG or VLAN) on which the virtual router is
defined
•
Virtual Router Identifier—The virtual router identification number.
•
Virtual Router MAC Address—The virtual MAC address of the virtual router
•
Virtual Router IP Address Table—IP addresses associated with this virtual router.
•
Description—The virtual router name.
•
Additional Status
-
Version—The virtual router version.
-
Status—Is VRRP enabled.
-
IP Address Owner—The owner of the IP address of the virtual router.
-
Skew Time—Time used in calculation of master down interval.
-
Master Down Interval—Length of time that master unit has been down.
-
Master/Backup Status—Is the virtual router the master or backup.
-
Preempt Mode—Is Preempt mode enabled.
-
Accept/Control Mode—Displays either Drop/Accept.
•
Track Parameters
-
Tracker Object—Displays number of the SLA track that verifies the connectivity.
-
Decrement—If the track object state is down, the VRRP priority of the router is
decremented by this value.
-
State—Displays whether route is Up or Down.
-
Current Priority—Displays priority of the router.
•
My Parameters (of virtual router selected)
-
Priority—Priority of this virtual router's device, based on its ability to function as a
master.
-
Advertisement Interval—Time interval, as described in
-
Source IP Address—IP address to be used in VRRP messages.
19
VRRP
Advertisements.
354