Cisco 350 Series Administration Manual page 157

8
131
The feature set of the Sx350X and SG350XG/SX350X is the same, and similarly the feature
set of the Sx550X and SG550XG/SX550X is the same. However there are a few differences in
feature support and table sizes. For these features, hybrid stack supports the lowest
denominator for these features/tables. The following is list of differences per each hybrid stack
type, and the setting used in each unit type and in the hybrid stack:
Feature/Table
OOB port
MAC table size
ACL TCAM
ARP table size
Max MAC table aging
Feature/Table
OOB port
MAC table size
ACL TCAM
Router TCAM
ARP table size
Number of Multicast groups
Max. number of IPv4 routes
Max. number of IPv4 host
directly-connected
Max. number of IPv4
Multicast routes
Max number of IPv6
interfaces
Sx550X SG550XG/
SX550X
Not Supported Supported
16K 32K
3K- reserved 2K- reserved
4K – reserved 8K – reserved
400 630
Sx350X
Not Supported
16K
1K- reserved
992
1K – reserved
2K
990
820
255
106
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Administration: Stack Management
Software Auto Synchronization in Stack
Hybrid Stack
Not Supported
16K
2K- reserved
4K – reserved
400
SG350XG/ Hybrid Stack
SX350X
Supported Not Supported
32K 16K
2K- reserved 1K- reserved
7168 (affects 992
also default
and Max
setting per
each type)
8K – reserved 1K – reserved
4K 2K
7168 990
7092 820
1800 255
200 106