Recurring Time Range - Cisco 350 Series Administration Manual

8
STEP 4
STEP 5

Recurring Time Range

STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
126
• Absolute Starting Time—To define the start time, enter the following:
- Immediate—Select for the time range to start immediately.
- Date, Time—Enter the date and time that the Time Range begins.
• Absolute Ending Time—To define the start time, enter the following:
- Infinite—Select for the time range to never end.
- Date, Time—Enter the date and time that the Time Range ends.
Click Apply.
To add a recurring time range, click Recurring Range.
A recurring time element can be added to an absolute time range. This limits the operation to
certain time periods within the absolute range.
To add a recurring time range element to an absolute time range:
Click Administration > Time Settings > Recurring Range.
The existing recurring time ranges are displayed (filtered per a specific, absolute time range.)
Select the absolute time range to which to add the recurring range.
To add a new recurring time range, click Add.
Enter the following fields:
• Recurring Starting Time—Enter the date and time that the Time Range begins on a
recurring basis.
• Recurring Ending Time—Enter the date and time that the Time Range ends on a
recurring basis.
Click Apply.
Click Time Range to access the Absolute Time Range page.
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Administration: Time Settings
Recurring Time Range