File Management - Cisco SF 300-08 Administration Manual

Console Menu Interface
Console Interface Main Menu
Cisco Small Business 300 Series Managed Switch Administration Guide

File Management

Path: Switch Main Menu > System Configuration Menu > File Management
Use the File Management Menu to upload or download files or change the Active
Image.
• Upgrade/Backup <IPv4>
• Upgrade/Backup <IPv6>
• Active Image
There are two firmware images, Image1 and Image2, stored on the switch. One of
the images is identified as the active image and other image is identified as the
inactive image. The switch boots from the image you set as the active image.
When you upgrade the firmware, the new image is always replaces the image
identified as the inactive image. After uploading new firmware on the switch, the
switch continues to boot by using the active image (the old version) until you
change the status of the new image to be the active image. You can change the
image identified as the inactive image to the active image by using the procedure
in the Active Image section.
Upgrade / Backup <IPv4>
Path: Switch Main Menu > System Configuration Menu > File Management >
Upgrade/Backup <IPv4>
Use Upgrade/Backup <IPv4> to upload or download files, such as the startup
configuration, boot, or image file via a TFTP server.
Upgrade / Backup <IPv6>
Path: Switch Main Menu > System Configuration Menu > File Management >
Upgrade/Backup <IPv6>
Use Upgrade/Backup <IPv6> to upload or download files, such as the startup
configuration, boot, or image file via a TFTP server.
20
310