3
38
Hovering over a suspended port displays a tooltip with the following information:
-
Port name.
-
If the port is a member of a LAG, the LAG identity of the port.
-
The suspension reason if it is suspended.
•
Table View
In table view, there is no need to select a specific stack unit. Information is displayed in
table form, as shown below:
The following fields are displayed:
-
Interface—Port or LAG that was suspended
-
Suspension Reason—Reason interface was suspended
-
Auto-recovery current status—Has auto recovery been enable for the feature that
caused the suspension.
The following configuration options (right-hand corner) are available:
•
Display Mode—Select either Device View or Table View.
•
Refresh Time—Select one of the options displayed.
•
Error Recovery Settings—Click to open
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Error Recovery
Settings.
Dashboard
Suspended Interfaces