Cisco 350 Series Administration Manual page 727

Smart Network Application (SNA)
Tags
STEP 1
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Built-In Tags
These tags are applied automatically to nodes as they are added to the topology. These tags can
be persistent or state-based. As long as the tag applies to the device, it cannot be removed from
the device. The following is a list of built-in tags:
Tags
SNA
Partial SNA
Offline
Switch
Router
Access Point
IP Phone
PC
Notifications
PoE PSE
PoE PD
View Tags
To view a list of all Tags, perform the following:
Click the Hamburger menu in the left-hand side of the Topology view:
Method for Assigning Tag
According to SNA internal data
According to SNA internal data
According to SNA internal data
According to advertised data on discovery protocols
According to advertised data on discovery protocols
According to advertised data on discovery protocols
According to advertised data on discovery protocols
According to advertised data on discovery protocols (host)
According to SNA internal data. State based, is displayed if unread
notifications exist on the device.
According to SNA internal data – displayed if a device is capable of
supplying power via PoE (even if it doesn't actually supply any
power)
According to SNA internal data. This is displayed if a device is
capable of receiving power via PoE (even if it does not actually
receive any power via PoE).
25
501