Mac Group Address - Cisco 350 Series Administration Manual

Multicast

MAC Group Address

STEP 3
MAC Group Address
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Click Apply. The Running Configuration file is updated.
The MAC Group Address page has the following functions:
• Query and view information from the Multicast Forwarding Data Base (MFDB),
relating to a specific VLAN ID or a specific MAC address group. This data is acquired
either dynamically through IGMP/MLD snooping or statically by manual entry.
• Add or delete static entries to the MFDB that provide static forwarding information,
based on MAC destination addresses.
• Display a list of all ports/LAGs that are a member of each VLAN ID and MAC address
group, and enter whether traffic is forwarded to it or not.
To define and view MAC Multicast groups:
Click Multicast > MAC Group Address.
Enter the Filter parameters.
• VLAN ID Equals To—Set the VLAN ID of the group to be displayed.
• MAC Group Address Equals To—Set the MAC address of the Multicast group to be
displayed. If no MAC Group Address is specified, the page contains all the MAC Group
Addresses from the selected VLAN.
Click Go, and the MAC Multicast group addresses are displayed in the lower block.
Entries that created both in this page and in the
displayed. For those created in the
converted to MAC addresses.
Click Add to add a static MAC Group Address.
Enter the parameters.
• VLAN ID—Defines the VLAN ID of the new Multicast group.
• MAC Group Address—Defines the MAC address of the new Multicast group.
Click Apply, the MAC Multicast group is saved to the Running Configuration file.
IP Multicast Group Address
IP Multicast Group Address
15
page are
page, the IP addresses are
267