Cisco 350 Series Administration Manual page 473

17
STEP 2
NOTE
STEP 1
330
• NAS Address—Address of switch containing RADIUS client. Displays N/A if the
Event Type is Date/Time Change or Reset.
• User Address—If the authenticated user is the network administrator, this is its IP
address; if the user is a station, this is its MAC address. Displays N/A if the Event Type
is Date/Time Change or Reset.
• Event Time—Time of event.
To see additional details for a user/event, select the user/event and click Details.
The following fields are displayed:
The fields in this page depend on the type of account viewed and the details received for it. Not
all fields are always displayed.
• Event Time—See above.
• Event Type—See above.
• User Name—See above.
• Authentication Method—See above.
• NAS IPv4 Address—See NAS Address above.
• NAS Port—Port used on the switch at the NAS address.
• User Address—See above.
• Accounting Session Time—See Event Time above.
• Session Termination Reason—Displays reason for session termination, such as User
Request.
RADIUS Server Rejected Users
To view the users who have attempted to authentication using the RADIUS server and have
been rejected:
Click Security > RADIUS Server > RADIUS Rejected Users.
The rejected users are displayed along with the following fields:
• Event Type—Displays one of the following options:
- Rejected—User was rejected.
- Time Change—Clock on device was changed by the administrator.
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Security
RADIUS