Cisco 350 Series Administration Manual page 246

Port Management
Green Ethernet
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
- Operational—Displays whether Energy Detect is currently operating on the local
port. This is a function of whether it has been enabled (Administrative Status),
whether it has been enabled on the local port and whether it is operational on the
local port.
- Reason—Displays the reason that Energy Detect is not operational even if it is
enabled.
• Short Reach—State of the port regarding the Short Reach feature:
- Administrative—Displays whether Short Reach is enabled.
- Operational—Displays whether Short Reach is currently operating on the local
port. This is a function of whether it has been enabled (Administrative Status),
whether it has been enabled on the local port and whether it is operational on the
local port.
- Reason—Displays the reason that Short Reach is not operational even if it is
enabled.
- Cable Length—Length of cable.
• 802.3 Energy Efficient Ethernet (EEE)—State of the port regarding the EEE feature:
- Administrative—Displays whether EEE was enabled.
- Operational—Displays whether EEE is currently operating on the local port. This
is a function of whether it has been enabled (Administrative Status), whether it has
been enabled on the local port and whether it is operational on the local port.
- LLDP Administrative—Displays whether advertising EEE counters through LLDP
was enabled.
- LLDP Operational—Displays whether advertising EEE counters through LLDP is
currently operating.
- EEE Support on Remote—Displays whether EEE is supported on the link partner.
EEE must be supported on both the local and remote link partners.
Select a Port and click Edit.
(For non-XG devices only) Select to enable or disable Energy Detect mode on the port.
(For non-XG devices only) Select to enable or disable Short Reach mode on the port if there
are GE ports on the device.
Select to enable or disable 802.3 Energy Efficient Ethernet (EEE) mode on the port.
Select to enable or disable 802.3 Energy Efficient Ethernet (EEE) LLDP mode on the port
(advertisement of EEE capabilities through LLDP).
10
199