Cisco 350 Series Administration Manual page 595

Security: IPv6 First Hop Security
Common Tasks
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Attach the policy to a VLAN, port or LAG using either the
Policy Attachment (Port)
Router Advertisement Guard Work Flow
In the RA Guard Settings
In this same page, set the global configuration values that are used if no values are set in a
policy.
If required, either configure a user-defined policy or add rules to the default policies for the
feature.
Attach the policy to a VLAN, port or LAG using either the
Policy Attachment (Port)
DHCPv6 Guard Work Flow
In the DHCPv6 Guard Settings
In this same page, set the global configuration values that are used if no values are set in a
policy.
If required, either configure a user-defined policy or add rules to the default policies for the
feature.
Attach the policy to a VLAN, port or LAG using either the
Policy Attachment (Port)
Neighbor Discovery Inspection Work Flow
In the ND Inspection Settings
In this same page, set the global configuration values that are used if no values are set in a
policy.
If required, either configure a user-defined policy or add rules to the default policies for the
feature.
pages.
page, enter the list of VLANs on which this feature is enabled.
pages.
page, enter the list of VLANs on which this feature is enabled.
pages.
page, enter the list of VLANs on which this feature is enabled.
Policy Attachment (VLAN)
Policy Attachment (VLAN)
Policy Attachment (VLAN)
26
or
or
or
454