12
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
264
•
Group Size—Number of addresses in the first Multicast group range.
Click Add to associate a Multicast group to a VLAN. Any VLAN can be selected.
Enter the following fields:
•
Multicast TV VLAN—VLAN to which the Multicast packets are assigned. When a
VLAN is selected here, it becomes a Multicast TV VLAN
•
Multicast Group Start—First IPv4 address of the Multicast group range.
•
Group Definition—Select one of the following range options:
-
By group size—Specify the number of Multicast addresses in the group range.
-
By range—Specify an IPv4 Multicast address greater than the address in the
Multicast Group Start field. This will be the last address of the range.
Click Apply. Multicast TV VLAN settings are modified, and written to the Running
Configuration file.
Port Multicast VLAN Membership
To define the Multicast TV VLAN configuration:
Click VLAN Management > Access Port Multicast TV VLAN > Port Multicast VLAN
Membership.
Select a VLAN from Multicast TV VLAN.
Select an interface from Interface Type.
The Candidate Access Ports list contains all access ports configured on the device. Move the
required ports to the Member Access Ports field.
Click Apply. Multicast TV VLAN settings are modified, and written to the Running
Configuration file.
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
VLAN Management
Access Port Multicast TV VLAN