Cisco 350 Series Administration Manual page 533

18
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
STEP 9
STEP 10
STEP 11
STEP 12
STEP 13
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
362
Common Tasks
Workflow 1: To enable 802.1x authentication on a port:
Click Security > 802.1X Authentication > Properties to globally enable 802.1x
authentication.
Enable Port-based Authentication.
Select the Authentication Method.
Click Apply, and the Running Configuration file is updated.
Click Security > 802.1X Authentication > Host and Session.
Select the required port and click Edit.
Set the Host Authentication mode.
Click Apply, and the Running Configuration file is updated.
Click Security > 802.1X Authentication > Port Authentication.
Select a port, and click Edit.
Set the Administrative Port Control field to Auto.
Define the authentication methods.
Click Apply, and the Running Configuration file is updated.
Workflow 2: To configure traps
Click Security > 802.1X Authentication > Properties.
Select the required traps.
Click Apply, and the Running Configuration file is updated.
Workflow 3: To configure 802.1x-based, MAC-based authentication or Web-based
authentication
Click Security > 802.1X Authentication > Port Authentication.
Select the required port and click Edit.
Enter the fields required for the port.
The fields in this page are described in Port Authentication.
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Security: 802.1X Authentication
Overview