Cisco 350 Series Administration Manual page 472

Security
RADIUS
STEP 1
STEP 2
STEP 3
STEP 1
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
RADIUS Server Users
To add a user:
Click Security > RADIUS Server > RADIUS Server Users.
The current users are displayed.
Click Add.
• User Name—Enter the name of a user.
• Group Name—Select a previously-defined group.
• Password—Enter one of the following options:
- Encrypted—A key string is used to encrypt communications by using MD5. To use
encryption, enter the key in encrypted form.
- Plaintext—If you do not have an encrypted key string (from another device), enter
the key string in plaintext mode. The encrypted key string is generated and
displayed
Click Apply. The user definition is added to the Running Configuration file of the device.
RADIUS Server Accounting
The Radius server saves the last accounting logs in a cycle file on FLASH. These can be
displayed.
To display RADIUS server accounting:
Click Security > RADIUS Server > RADIUS Server Accounting.
RADIUS accounting events are displayed along with the following fields:
• User Name—Name of a user.
• Event Type—One of the following values:
- Start—Session was started.
- Stop— Session was stopped.
- Date/Time Change—Date/time on the device was changed.
- Reset—Device has reset at the specified time.
• Authentication Method—Authentication method used by the user. Displays N/A if the
Event Type is Date/Time Change or Reset.
17
329