Cisco 350 Series Administration Manual page 741

Smart Network Application (SNA)
DAC Workflow
STEP 1
STEP 2
STEP 3
STEP 4
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
DAC List Management
After you have added client devices and selected which of their ports are to be authenticated,
all unauthenticated devices detected on those ports are added to the List of Unauthenticated
Devices.
DAC supports the following lists of devices:
• White List—List of all servers that can be authenticated
• Black List—List of servers that must never be authenticated
If you want devices and their ports to be authenticated, they must be added to the white lists. If
you do not want them to be authenticated, not action is required - they are added to the black
list by default.
To add these devices to the white list or remove them from the black list:
Click the Unauthenticated device icon
The DAC List Management page is displayed with the list of unauthenticated devices.
Select the devices you want to add to the white list and click Add to Whitelist.
Select the devices you want to add to the black list and click Add to Blacklist.
Click Apply. Packets entering on the ports on the device are authenticated on the RADIUS
server.
To manage the white or black lists, click the Whitelist or Blacklist tab, respectively
You can perform the following tasks in these pages:
• Remove from list—Removes selected devices from the list.
• Move to Black List or Move to White List—Moves selected devices to the
specified list.
• Add Device—Add a device to either the black or white list by entering its MAC
address and pressing Add+.
•
Search for device with MAC address—Enter a MAC address and click search. The
system returns the date and time that traffic from this devices was encountered (Last
Seen) and through which port/device it attempted to access the network (Seen At).
25
515