Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 77

5.4.2.2 Main Menu
The Main menu provides top-level access to the menu structure. To open the Main menu,
show the function keys and select Menu (→ page 64).
From the Main menu, you can open the following menus:
• Control
On the Control menu, you can select the wavelengths for the measurement (→ page 69).
Preferences
•
On the Preferences menu, select the settings for data acquisition and for the lamps
(→ page 70).
Diagnostics
•
The Diagnostics menu provides information for diagnostic purposes (read-only). In
addition, you can perform a self-test for the detector and several other tests (→ page 71).
• Configuration
The Configuration menu provides information about the detector configuration and
allows you to make the required settings or perform the related commands (→ page 71).
The detector type determines which commands, and parameters are available on the
menus.
5.4.2.3 Control Menu
On the Control menu, you can select the wavelengths for the measurement.
To ...
Select a channel and enter the wavelength for the measurement.
You can exclude channels 2 through 4 from the measurement. For these
channels, the input field has 4 positions. At the first position, the
function key ∧ toggles between "---" (= Off, that is, the channel is
excluded from the measurement) and a value. Specify the wavelength at
the positions 2 through 4.
Tip: The number of selected wavelengths determines the appearance of the
status screen (→ page 57).
Operating Instructions
VWD-3100 and VWD-3400RS Variable Wavelength Detectors
UltiMate 3000 Series:
Select ...
Wavelength 1
Wavelength 2
Wavelength 3
Wavelength 4
Page 69