Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 76

UltiMate 3000 Series:
VWD-3100 and VWD-3400RS Variable Wavelength Detectors
To ...
Toggle between two operating states (for example, between On and Off).
Confirm the selection and perform the action.
For example, if you change the operating status of a lamp from Off to On, you have
to select OK to confirm the change and turn on the lamp.
Cancel the action and restore the last value.
For example, if you change the operating status of a lamp from Off to On, select
Cancel to undo this action and to restore the previous operating state.
Note: Depending on the selected option, specific keys may replace these general keys.
If an error is found, one or more messages appear on the front panel display. In this case,
the Prev, Next, and Clear keys appear on the navigation bar.
To ...
Return to the previous message.
Proceed to the next message.
Remove a message from the display.
Page 68
Select ...
Toggle
OK
Cancel
Select ...
Prev
Next
Clear
Operating Instructions