Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 89

Monitoring the progress of data acquisition on the detector display
You can monitor the progress of data acquisition on the display. The number of wavelengths
and the data display mode (absorbance, ratio, channel, or raw) determine how the information
is displayed. The standard display mode is Absorbance. However, you can also select a
different display mode (→ page 82).
Absorbance [mAU] @ Pos: 254nm
UV: On
0.234
1.456
UV: On
The status screen shows the following information:
• Display mode
• Measuring wavelength
• Measured value
• Lamp status, retention time (RT) in minutes or mode
If the data display mode is Channel or Raw, the value measured for the reference channel
(Ref or R) is also displayed.
Operating Instructions
VWD-3100 and VWD-3400RS Variable Wavelength Detectors
1.245
VIS: Off
Absorbance [mAU]
@ 220
@ 272
VIS: On
Fig. 25: Data acquisition screen (examples)
RT: 2.317 min
1.234
@ 254
-
Mode: Multi wvl
UltiMate 3000 Series:
.
Page 81