Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual page 68

UltiMate 3000 Series:
VWD-3100 and VWD-3400RS Variable Wavelength Detectors
3. Press the F8 key or select Command on the Control menu.
4. To see the parameters and commands that are available for the detector, click the plus
sign next to UV.
The commands and parameters available in the dialog box vary, depending on the
♦ Chromeleon version
♦ Options selected for the detector in the Properties dialog (→ page 44).
♦ Display filter level (Normal, Advanced, or Expert)
5. Change the display filter level if necessary. Right-click in the commands list and select
the filter level on the menu.
6. Verify that the detector is connected to Chromeleon. If it is not, select Connect to
connect the detector.
For a list of the commands and properties that are supported for the detector, see the
Chromeleon Help. In addition to the detector commands and parameters, the Commands
dialog box provides access to all of the commands and parameters available for all devices
that are installed in the selected timebase.
Page 60
Fig. 18: Commands dialog box
Operating Instructions