Multi-Function Display - Yamaha Neo's 4 YN50F Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
If the warning light does not come on
initially when the key is turned to
"ON", or if the warning light remains
on, have a Yamaha dealer check the
electrical circuit.
NOTICE
Do not continue to operate the
3
engine if it is overheating.
TIP
G
For radiator-fan-equipped vehi-
cles, the radiator fan(s) automati-
cally switch on or off according to
the coolant temperature in the
radiator.
G
If the engine overheats, see page
6-30 for further instructions.
Engine trouble warning light "
This warning light flashes or stays on
if an electrical circuit monitoring the
engine is not working correctly. If this
occurs, have a Yamaha dealer check
the self-diagnosis system.
The electrical circuit of the warning
light can be checked by turning the
key to "ON". The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come on
initially when the key is turned to
ECA10021
"ON", or if the warning light remains
on, have a Yamaha dealer check the
electrical circuit.
EAUT1934
"

Multi-function display

1. Clock
2. Speedometer
3. Fuel gauge
4. Oil change indicator "OIL"
5. Odometer/tripmeter/fuel reserve tripmeter
6. "RESET/SELECT" button
TIP
The multi-function display performs
the following self-test for three
seconds in order to check the electri-
cal circuit.
G
3-3
The speedometer digits display
from 0 to 99, and then from 99 to
0 in kilometers. If the speedome-
ter is set to miles, the digits dis-
play from 0 to 65, and then from
65 to 0.
EAUS1470