Multi-Function Display - Yamaha WR25R 2008 Owner's Manual

The electrical circuit of the warning light
can be checked by turning the key to
"ON".
If the warning light does not come on
for a few seconds, then go off, have a
Yamaha dealer check the electrical cir-
cuit.
NOTICE
Do not continue to operate the en-
gine if it is overheating.
TIP
G
For radiator-fan-equipped vehi-
cles, the radiator fan(s) automati-
cally switch on or off according to
the coolant temperature in the ra-
diator.
G If the engine overheats, see page
7-43 for further instructions.
Engine trouble warning light "
This warning light comes on if an elec-
trical circuit monitoring the engine is not
working correctly. If this occurs, have a
Yamaha dealer check the self-diagno-
sis system.
INSTRUMENT AND CONTROL FUNCTIONS
The electrical circuit of the warning light
can be checked by turning the key to
"ON". If the warning light does not come
on for a few seconds, then go off, have
a Yamaha dealer check the electrical
circuit.
TIP
ECA10021
This warning light will come on when
the key is turned to "ON" and the start
switch is pushed, but this does not indi-
cate a malfunction.
EAU43021
"

Multi-function display

Be sure to stop the vehicle before
making any setting changes to the
multi-function
settings while riding can distract the
operator and increase the risk of an
accident.
1. "RESET" button
2. "SELECT 1" button
3. "SELECT 2" button
4. Clock/stopwatch
5. Speedometer
6. Odometer/tripmeter/fuel reserve tripmeter
4-3
WARNING
display. Changing
1 2 3
4
6 5
EAU45343
EWA12312
2
3
4
5
6
7
8
9