Displaying Streaming Video - Barco TransForm A User Manual

4.3.4 Displaying streaming video

With a right click on the window of streaming video the control panel for this type of video can be opened.
The first time the software video is opened for a channel of a Streaming Video Card, the
video will not be displayed automatically. This is because the Streaming Video Card must
first be configured, please refer to entry Edit below, also the streams must be edited,
please refer to the entry Board settings below!
Setting of contrast
Setting of brightness
Setting of saturation
Setting of hue (NTSC only)
Hue
not applicable
Deinterlace
not applicable
Noise Reduction
Switch to 16:9 aspect ratio
16:9
Scale the video up to the whole display wall or in Channel Video mode to the projection
Fullscreen
cubes, which currently display a part of it.
Freeze / return to play
if the source is frozen the eight above mentioned settings can not be changed
Opens the Streams Param Editor, to configure the S
Edit
In case of video loss a blue window is displayed.
Detect Signal
Loss Otherwise the last frame is displayed as freeze image unless the signal is again available.
Source 1 (MPG)
Setting of the used frame rate, default is 25/30 fps depending on the video standard, in addi-
Frame Rate
tion 50/60 fps are selectable.
Format Source
Display
Manual
Displays the detected video standard.
Standard
Possible standards:
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
Auto-selected
Switch to native aspect ratio of source
Switch to native aspect of display
Resize x and y independently
,
PAL NTSC
Video window and dialog box
V C , please see below!
TREAMING IDEO ARD
Video dialog box – streaming video
_______________________________________________________________
4. Operating
Figure 4-6
Table 4-8
4-18