Displaying Digital Video - Barco TransForm A User Manual

4.3.5 Displaying digital video

With a right click on the window of digital video the control panel for this type of video can be opened.
Setting of contrast
Setting of brightness
Setting of saturation
Setting of hue (NTSC only)
Hue
not applicable
Deinterlace
not applicable
Noise Reduction
Switch to 16:9 aspect ratio
16:9
Scale the video up to the whole display wall or in Channel Video mode to the projection
Fullscreen
cubes, which currently display a part of it.
Freeze / return to play (if the source is frozen the eight above mentioned settings can not be
changed, the Scaler settings dialog can not be opened)
In case of video loss a blue window is displayed
Detect Signal
Loss Otherwise a black window is displayed unless the signal is again available.
Source 0 (Disabled)
1 (SDI)
Setting of the used frame rate, default is 25/30 fps depending on the video standard, in addi-
Frame Rate
tion 50/60 fps are selectable.
Format Source
Display
Manual
Displays the detected video standard.
Standard
Possible standards:
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
Video channel disabled
Enable SDI video signal
Switch to native aspect ratio of source
Switch to native aspect of display
Resize x and y independently
,
PAL NTSC
Video window and dialog box
Video dialog box – digital video
_______________________________________________________________
4. Operating
Figure 4-10
Table 4-13
4-26