Omniscaler - Barco TransForm A User Manual

3.2.6 OmniScaler

In addition to graphic cards, also O
ules. The O S provide the ability to integrate video and RGB data into the graphical data from the graphic
MNI CALERS
cards. Therefore the out connector of the graphic card needs to be connected to the in connector of the O
S . Only graphic cards in digital mode can be connected. DDC information from the projection device is looped
CALER
through to the graphic card for further processing.
Connectors
The O S provides one Dual-DVI connector for data insertion from the graphic card and one Dual-DVI con-
MNI CALER
nector for digital output for two projection modules.
In every O S card package a Dual-DVI to Dual-DVI cable is included. It serves to connect port 0/1 in of the
MNI CALER
O S with port 0/1 or port 2/3 of the graphic card:
MNI CALER
For the connection to the projection modules the Dual-DVI to 2×DVI-D adapter cable that was provided with the
graphic card is used. It must be plugged into port 0/1 out of the O
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
S are a substantial part of T
MNI CALERS
F A to connect to projection mod-
RANS ORM
Dual-DVI to Dual-DVI adapter cable
S .
MNI CALER
_______________________________________________________________
3. Getting started
-
MNI
Figure 3-25
ports of the O S
MNI CALER
Figure 3-26
3-19