3. Getting started
Finishing the installation
When the system has come up a dialog warns about invalid display settings. Confirm it with OK.
The Display Properties dialog appears. Move the slider in the section Screen area to the very right to select the
largest screen area possible and click Apply:
The following dialog must be confirmed with Yes.
Configuration
After the driver installation you can specify the arrangement and the order of the connected Barco projection
cubes, projectors or monitors. Refer to section
3.5.2 Configuring the display
driver, please! As well you can configure
the video switcher. Refer to section
6.1.3 Configuring
video, please!
_______________________________________________________________
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
3-51