Barco TransForm A User Manual page 116

Managing the configuration files
When displaying a monitor signal, settings such as colors and brightness can be adjusted. In addition, attributes
of the video window can be customized. These properties, which are valid, independent of the signal's source
are called Settings and can be saved in a configuration file (e. g. default.frg4.vcf) and re-loaded.
From the File menu choose Open Settings to load a certain configuration file; choose Save Settings or Save
Settings As ... to store your settings.
The video software can also be started from the command line with the option /c: specifying a certain configu-
ration file. Please, refer to section
If using the option /c:, take care to indicate the complete absolute or relative path of the
configuration file!
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
4.3.1 Display in a window.
Managing configuration files
_______________________________________________________________
4. Operating
Figure 4-21
4-40