Barco TransForm A User Manual page 45

Connecting order remote power on/off and genlock
In general all O B devices that are locked to the same source must be connected to each other by means of
MNI US
the remote power on/off cabling. In particular, if an external source is used for genlocking it must be connected
to the external genlock in connector [17] on the back of the P
If multiple T F A systems shall be locked to the same source, the remote power on/off out connector of
RANS ORM
the last O B must be connected to the external genlock loop through in connector [15] on the back of the
MNI US
P of the next T
ROCESSOR RANS
An example of cabling for an external genlock source is given in the figure below:
external
genlock
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
F A system.
ORM
.
ROCESSOR
cabling for remote power on/off and external gunlock at O
_______________________________________________________________
3. Getting started
Figure 3-38
B A18 devices
MNI US
3-28