Barco TransForm A User Manual page 97

Configuring Streaming Video Card
For each S V
TREAMING IDEO
therefore select Board Settings from the Options menu.
IP Configuration
Address
Netmask
Gateway
Decoder Configuration
Algorithm
Configuring video streams
The parameters of a video stream must be defined in this Stream Params Editor, before the S
can display it. Once defined it is available for every S
Params Editor press Edit on the control panel.
Pressing the Add button adds a new stream with the entered name into the Streams list. The parameters that
are displayed at that time are saved together with it. If an entry with the same name already exists its parame-
ters are not changed. Pressing the Apply button applies the displayed parameters to the hardware. In that way
changes can be controlled directly. Pressing the OK button applies the parameters to the hardware and to the
registry. Pressing the Cancel button closes the window, anyhow changes that are already confirmed with the
Add or Delete button can not be revoked.
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
C once the configuration parameters must be entered into the Board Settings dialog,
ARD
IP address of the S
TREAMING
Each S V C
TREAMING IDEO ARD
Netmask of the S
TREAMING
Gateway, must be the same value for all cards. Even if the network does not require
an indication of the Gateway, a value must be filled in.
List of the supported decoder algorithms. All video streams processed by one
S V C must have the same compression algorithm. Possible algorithms
TREAMING IDEO ARD
are: h263, mjpeg, mpeg2, mpeg4_sp, scn_dec, visiowave
V C .
IDEO ARD
needs its own, fixed IP address
V C , must be the same value for all cards
IDEO ARD
V C
TREAMING IDEO ARD
_______________________________________________________________
Board Settings dialog of the S
TREAMING
TREAMING
in the system. To open the Stream
4. Operating
Figure 4-7
V C
IDEO ARD
Table 4-11
V C
IDEO ARD
4-21