Configuration Of Rgb Input - Barco TransForm A User Manual

Detects automatically the visible portion of the signal and positions it in the video window.
Detect Postition
If selected this applies each time the signal changes or gets reconnected.
Only applicable with D
Edit the preset.
Edit
Create new preset.
New
When starting to display an RGB-source the settings of the source are automatically detected (as long as the
default setting Detect Position remains on and Auto is selected in the Presets list ). The D
performs complete auto detection of the screen mode as well as of the position. In most cases this results in
settings to optimally display the RGB data. If anyhow auto detection sets a preset with e.g. a different resolution,
then, if you know the timing of the incoming signal, select this timing from the preset list, the video software
will position the source in respect of the newly selected timing.
Depending on the version of the controlware of the D
different to the given description, which is based on version 3010-02. Please, refer in this case to section
Configuration of RGB input.
To check the version of the controlware you can use the device explorer, please refer to section
6.1.13 Device
Menus and dialog boxes in the video dialog box
The File and Options menus allow the administration of configuration files and preset files. Settings can be
stored in configuration files for later program calls.
Also, the module related display of monitor signals i.e. not within the window but on one or several projection
modules or on the whole display wall can be controlled.
File
Open Settings ...
Save Settings
Save Settings As ...
Import / Export Presets
Exit
Options
Save Settings on Exit
Save Window Position on Exit
Restore Defaults
User Interface
Fullscreen Means Channel Video
Enable Cropping
Enable Keyboard Shortcuts
Left Click Pause
List Source Names
Resize immediately
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
RGB I
UAL
Explorer.
Load a set of settings from a configuration file.
Save the current settings in a configuration file.
Save the current settings under a different name.
Imports or exports a preset file.
Exit the video software
Settings are saved on exit.
Position of RGB window and control panel is saved on exit.
Return to the original settings of a configuration.
In full-screen mode the video is displayed on all projection modules,
which display currently a part of it
Dragging a border of the window inwards cuts the window. The RGB dis-
play is cropped accordingly. Dragging then the lower left corner outwards
enlarges the cropped portion.
Cropping is a prerequisite for usage of the zoom function of the mouse,
please see below!
Frequently used commands can be entered with the keyboard as well as
with the mouse
Left click in RGB window results in freeze / return to play
In the input list the source names are listed
Video is resized while the video window is resized
C with controlware CTW-3010-02 or later.
NPUT ARD
RGB I C , auto detection might behave slightly
UAL NPUT ARD
_______________________________________________________________
4. Operating
Table 4-16
Video dialog box – RGB sources
RGB I C
UAL NPUT ARD
4.3.7
4-31