Barco TransForm A User Manual page 160

Channel view
The channel view lists information about how the hardware is used and configured to setup the display wall. It
is organized according to the way one looks at the display wall.
There exist three main entries: Wall Configuration, Output Channels and Input Channels.
Wall configuration provides a quick overview about the properties of the display wall. The table below lists
these properties:
Property
Rows
Columns
Resolution_X
Resolution_Y
BusSegments
ColorDepth
InputChannels
OutputChannels
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
meaning
number of rows of projection modules in the display wall
number of columns of projection modules in the display wall
absolute number of pixels in horizontal direction
absolute number of pixels in vertical direction
OmniBus configuration: number of single PCI-Bus segments
(also the PCI-Bus segment in the P
number less 1 is the amount of used O
Processor configuration: always one PCI-Bus segment is indicated
color depth used to operate the display wall
number of available input channels
number of available output channels
6. Advanced configuration
DEX in channel view mode
is considered, therefore this
ROCESSOR
B devices)
MNI US
DEX - entries of wall properties
_______________________________________________________________
Figure 6-10
Table 6-19
6-40