Barco TransForm A User Manual page 84

/k:<event>
/t:<title>
/b[:[<alpha>][;<quality>]]]
/w:[[v]<width>[,<height>]]
[@<x>,<y>]
/a:s|d|m
/i:<source>
/o:b|m
/r:<reduction>
/p:<preset>
/p:<StreamName>[,
<StreamParm>=<Value>[,...]]
DstIPAddr
DstPort
DstIPProt
StreamProt
ProgramID
SkipStart
SkipEnd
SrcIPAddr
SrcPort
SrcIPProt
StartString
/s:a|n|p|s|5|6
/4
/16
/c
/f
/k
/m
/p
/t
If using the option /c:, take care to indicate the complete absolute or relative path to the
configuration file!
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
ated with multiple video windows.
Exit all videos started with option /e:<event>
Set video window title. Default is the name of the video channel.
Enables the usage of the transparency slider on the scaler settings
dialog. alpha sets the transparency in a range of 0 .. 255. quality
sets the Pre-Scaling factor in a range of 0 ..14
Sets size and position of video window. Mentioning just width and
height sets the dimensions of the complete window. By using v,
the dimensions refer only to the video (window borders require
extra space). @ determines the upper left position of the window.
Set aspect ratio of video window to source, display or manual
unless specified with /w:.
Select the source.
Sets the frame rate to bandwidth 25/30 fps or motion 50/60 fps.
Sets the dynamic reduction factor of the frame rate of the D
I C
NPUT ARD
applied to RGB channels: Selects a RGB preset (Autodetect is 0).
applied to streaming video channels: Selects the specified stream.
Parameters differing from the original stream definition can be
added; if a complete set of parameters is added the streamname
can be omitted. The following parameters are available. The values
are set according to the description in section
streaming video.
unicast, broadcast or <nnn.nnn.nnn.nnn>, see IP
Address
see Port
udp, rtp , see IP Protocol
auto, elementary, program, transport, see Stream
Protocol
see PID
see Skip byte at Start
see Skip byte at Start
see IP Address of the encoder
see Port number of the encoder
see IP Protocol for encoder communication
see Startstring to send to encoder for stream start
Sets the video standard to Auto, NTSC, PAL, SECAM, BW50 or
BW60.
Specify format of video source (4:3, 16:9)
Default is /4 (4:3)
Disable preset cache in the video dialog box (Input).
Display video without a window (title bar, borders). Setting aspect
ratio to source or to display preserves the aspect ratio of the
video, setting aspect ratio to manual keeps the size of the display.
Disable keyboard shortcuts
To be used if orbiting is enabled
Disable video dialog box
Make video window a topmost window
4.3.4 Displaying
________________________________________________________________
4. Operating
RGB
UAL
Table 4-3
options of video.exe
4-8