Barco TransForm A User Manual page 60

On the Locate Driver Files dialog, select Specify a
location and continue with Next >.
Specify the following path if your system is equipped with UGX G
c:\BARCO\Windows Drivers (OVS-2686)\Windows Drivers X.X\AGX3281\agx3281.inf
And specify respectively the following path, if your system is equipped with AGX G
c:\BARCO\Windows Drivers (OVS-2686)\Windows Drivers X.X\AGX3000\agx3000.inf
Also the folder Windows
agx3000.inf. These files may NOT be selected for graphic cards or OmniBus devices!
In a Processor configuration, if the Wizard wants to install the driver for an O
c:\BARCO\Windows Drivers (OVS-2686)\Windows Drivers X.X\INF\agx3000.inf\
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
On the next dialog Search and installation options
select the upper choice Search for the best driver in
these locations and Include this location in the
search. Click on the Browse button to select the re-
spective path.
RAPHIC
X.X\INF\ contains a file agx3281.inf and
Drivers
_______________________________________________________________
C :
ARDS
C :
RAPHIC ARDS
S , specify the following path:
MNI CALER
3. Getting started
3-43