Barco TransForm A User Manual page 100

Encoder
manufacturer – type
NiceVision – Recorder Pro
NKF – c15 / c20 / CS20
Optibase – MGW3100
Path 1 – Cx 1800
Pelco – PelcoNet NET350
Pelco – PelcoNet NET4001A
Pelco – PelcoNet NET4001A
Siemens OTN – MVIDIP
Tandberg – E5710
Tandberg – TT6120
Tandberg – TT7116
Teleste – easi BLUEbox
Teleste – EASI IPE
Teleste – EASI MP-E8 / S-Link
Telindus – Cellstack Centauri
VBrick – VB4000 / VB5000 /
VB6000
VBrick – VBXcast 9140-4200 /
VBXcast 9140-4300
Verint – S1500e / S1600e-T
Verint – S1700e
VideoLAN – VideoLAN (VLC/VLS)
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
compression IP
algorythm protocol
mpeg4 RTP
Only CIF resolution, only I and P frames are used.
No successive Video Object Plane (VOP) start markers without data (used in
recorded streams);
Stream must be multicasted and always available on the network (no
stream setup signaling required).
mpeg2 RTP
The Ethernet interfaces must be set to
necting to an NKF Switch.
mpeg2 –
mpeg2 UDP
h263 RTP
I-frame distance may not be 0.
mpeg2 RTP
No on-board RCP+ support.
h263 RTP
No on-board RCP+ support; limited frame rate.
mpeg2 –
mpeg2 –
mpeg2 UDP
Generates multiple-program transport streams (MPTS). The Video PID is
used to select the program.
mpeg2 UDP
mpeg2 UDP
mpeg2 –
mpeg4 RTP
mpeg2 RTP
mpeg2 UDP
ISMA features not supported.
mpeg4 UDP
ISMA features not supported.
mpeg4 RTP
Startstring example: SmartSight
Only with encoder firmware 3.20 build 444. Usage of S1700e recommend.
mpeg4 RTP
startstring example: SmartSight
mpeg2 –
mpeg4
mjpeg
For IP protocol multicast, unicast, UDP or RTP is possible.
Skip bytes Skip bytes
at start at end
0 0
0 0
Forced 100 Mbps Full Duplex
– –
0 0
0 0
4 0
0 0
– –
– –
0 0
0 0
0 0
– –
0 0
0 0
0 0
12 0
0 0
0 0
0 0
_______________________________________________________________
4. Operating
Stream TCP PID
protocol
auto OFF 0
auto OFF 0
, when con-
auto OFF –
auto OFF 0
auto OFF 0
auto OFF 0
auto OFF 0
– OFF –
– OFF –
auto OFF 0, 1, ...
auto OFF 590
auto OFF 0
– OFF –
auto OFF 0
auto OFF 0
auto OFF 0
auto OFF 0
auto ON 0
auto ON 0
auto OFF –
4-24