Barco TransForm A User Manual
Barco TransForm A User Manual

Barco TransForm A User Manual

Workstation for windows
Hide thumbs Also See for TransForm A:
Table of Contents

Advertisement

Quick Links

User's manual
TransForm A
®
Workstation for Windows

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TransForm A and is the answer not in the manual?

Questions and answers

Summary of Contents for Barco TransForm A

  • Page 1 User’s manual TransForm A ® Workstation for Windows...
  • Page 2 Modifications which result in a new version are indicated by a vertical bar. Windows and Windows NT are registered Trademarks of Microsoft Corporation. ___________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 3 Barco. If the purchaser or a third party carries out modifications or repairs on good delivered by Barco, or if the goods are handled incorrectly, in particular if the systems are commissioned or operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.
  • Page 4 An der Rossweid 5, D-76229 Karlsruhe Phone: +49-721-6201-0, Fax: +49-721-6201-298 E-mail: docu.de.bcd@barco.com, Web: www.barcocontrolrooms.com From: Date: Please correct the following points in this documentation (DOC-3266-2): page wrong correct __________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 5: Table Of Contents

    3.2.16 Example configurations ........................3-33 3.3 Starting up ..............................3-38 3.3.1 Connecting ............................3-38 3.3.2 Switching on ............................3-38 3.3.3 Switching off ............................3-39 3.4 Operating system ............................3-40 ___________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 6 6.1.4 Upgrading the display driver under Windows NT ................6-18 6.1.5 Upgrading the display driver under Windows 2000 or Windows XP ..........6-18 6.1.6 Deinstallation of the display driver (agxuninst.exe)................6-23 __________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 7 7.3 Order codes..............................7-17 8 Trouble shooting ..........................8-1 8.1 TransForm A not booting..........................8-1 8.2 Other faults ..............................8-2 8.3 Contact ................................8-3 9 Index ..............................9-1 _________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 8: Introduction

    This chapter explains the structure of the manual itself and the used typographic styles and symbols. Safety in- formation is provided concerning the operation of computer systems from Barco. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 9: How This Manual Is Organized

    Chapters, pages, figures and tables are numbered separately. Chapters are indicated by a »point syntax«, e. g. 4.2.3, pages by a »dash syntax«, e. g. 2-1, as figures and tables are, e. g. figure 5-4. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 10: Styles And Symbols

    The sheet icon indicates additional notes. Next to this icon you find further information. This arrow marks tips. Next to this icon you find important notes. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 11: Safety Instructions

    This equipment must be grounded (earthed) via the supplied 3 conductor AC power cable. (If the supplied power cable is not the correct on, consult your dealer.) ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 12 If not, the service person shall arrange for the installa- tion of a protective earthing conductor from the separate protective earthing terminal to the protective earth wire in the building. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 13: Unpacking Of Devices

    Keep the original shipping carton and packing material; they will come in handy if you ever have to ship your unit. For maximum protection, repack your set as it was originally packed at the factory. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 14: Online Manual

    If Acrobat Reader is already installed, the manual can be viewed just by a click on the link. Else the Acrobat Reader must be installed first. Its setup program can be found on the CD in section Product software -> 3rd party tools. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 15 2. Summary 2 Summary This chapter gives an overview about the features of T RANS ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 16: Properties

    Windows XP workstation respectively. It combines one P with up to four or five O A12 or O A18 devices ROCESSOR ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 17 RGB sources an additional E might be used; this setup is called “Processor configura- XTENDER tion”. ROCESSOR TCP/IP Figure 2-2 8 channel P in Processor configuration ROCESSOR ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 18: Getting Started

    This chapter describes the set up of the T A – Workstation for Windows and provides you with a guide RANS through the software configuration. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 19: Examining

    AGS-3328 AGS-3389 AGS-3390 ROCESSOR AGS-3389 AGS-3390 The figure above front view of the Processor includes the ATA RAID 1 hard disk drive system. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 20 The extensive documentation of the LED codes can be found on the documentation CD. Figure 3-4 RAID 1 SATA hard disk drives ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 21 LED 10 Mbps connection lightens green 100 Mbps connection lightens yellow 1000 Mbps connection 2×USB audio, micro ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 22 : AGS-3328-2/-3 (left) or AGS-3389-0/-1 (middle) or AGS-3390-0 (right) ROCESSOR In the following sections reference is taken to the numbering of the slots. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 23: Omnibus A12

    LED’s; the green LED power on [4] to the left is indicating if power is on. The red LED standby / component failed [6] to the right indicates that a redundant power module is not operable. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 24 A12 from overheating, the air supply openings in the case shall be kept free of obstructions! To ensure power redundancy take care to connect each of the power modules to an independent power net. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 25 Connector CPU board is reserved for the CPU board and connector link slot is reserved for the connection to . In the following sections reference is taken to the numbering of the PCI slots 1 – 12. ROCESSOR ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 26: Omnibus A18

    It is not an indicator that redundancy is available! ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 27 A18 from the power supply all power cords have to be pulled of the mains connection [27a] and [27b]. Therefore the back panel has to be easily accessible! _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-10...
  • Page 28 Connector CPU board is reserved for the CPU board and connector link slot is reserved for the connection to . In the following sections reference is taken to the numbering of the PCI slots 0 – 17. ROCESSOR _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-11...
  • Page 29: Extender

    LED’s, the green LED power on [4] to the left is indicating if power is on. The red LED power module failed [6] to the right indicates that a redundant power module is not operable. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-12...
  • Page 30 Figure 3-15 PCI Slots and Segments Connector PCI 0 is reserved for the link interface card to connect to the P ROCESSOR _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-13...
  • Page 31: Cabling

    . Or it is delivered as a USB keyboard. Plug it into one of the USB plugs [28] of the P ROCESSOR ROCESSOR Figure 3-18 mouse or keyboard connection via PS/2 (left) or USB (right) _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-14...
  • Page 32: Keyboard Extension

    The RJ-45 connection cable is not meant to connect REX and LEX via a network. The RJ-45 connectors of LEX and REX must be connected directly with each other! _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-15...
  • Page 33 TAS-3196 connection cable 20m TAS-2710 local extension box TAS-3195 PC cable TAS-3201 ROCESSOR grounding Figure 3-20 PS/2 Keyboard extension _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-16...
  • Page 34: Graphic Cards

    RAPHIC DDC capable display devices must be connected to the graphic cards before TransForm A is switched on. If they are connected afterwards, TransForm A will not be able to detect them! Specifications For detailed technical specifications of the graphic cards please refer to section 7.1 Technical...
  • Page 35 (view from front of the screens). Please refer to section 3.5.3 Configuring the display wall for further details. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-18...
  • Page 36: Omniscaler

    For the connection to the projection modules the Dual-DVI to 2×DVI-D adapter cable that was provided with the graphic card is used. It must be plugged into port 0/1 out of the O CALER _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-19...
  • Page 37 P AGS-3389 CALERS ROCESSOR Specifications For detailed technical specifications of the O please refer to section 7.1 Technical data. CALERS _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-20...
  • Page 38: Quad Analog Video Card

    PCI slots, please refer to sec- tion 3.2.15 Extender. Specifications For detailed technical specifications of the Q please refer to section 7.1 Technical data. NALOG IDEO _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-21...
  • Page 39: Streaming Video Card

    3.2.7 Quad Analog Video Card. RANS Specifications For detailed technical specifications of the S please refer to section 7.1 Technical data. TREAMING IDEO _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-22...
  • Page 40: Quad Sdi Video Card

    3.2.7 Quad Analog Video Card. RANS Specifications For detailed technical specifications of the Q SDI V please refer to section 7.1 Technical data. IDEO _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-23...
  • Page 41: Dual Rgb Input Card

    3.2.7 Quad Analog Video Card. RANS Specifications For detailed technical specifications of the D RGB I please refer to section 7.1 Technical data. NPUT _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-24...
  • Page 42: Multiport I/O Card

    I/O Card PCI 1 PCI 2 PCI 3 PCI 4 Figure 3-33 Position of Multiport I/O Card in an P AGS-3389 ROCESSOR _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-25...
  • Page 43: Network

    PCI 3 PCI 4 Figure 3-35 Network card in the P ROCESSOR Inserting a network card in an OmniBus or Extender is not supported! _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-26...
  • Page 44: Cpu Board

    Do not mix up the connetors for remote power on/off with the mechanically identical connectors of the network adapters! Mixing the connectores will cause damage to the system! _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-27...
  • Page 45 An example of cabling for an external genlock source is given in the figure below: external genlock Figure 3-38 cabling for remote power on/off and external gunlock at O A18 devices _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-28...
  • Page 46: Omnibus

    The Processor expects the primary graphic adapter in the first OmniBus. Therefore the OmniBus that is connected to the link interface 1 must be equipped with graphic cards. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-29...
  • Page 47 PCI 17 board slot Figure 3-41 Example for the numbering in a configuration with three O devices and one P AGS-3389 ROCESSOR _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-30...
  • Page 48: Extender

    PCI 1 PCI 2 PCI 3 PCI 4 Figure 3-43 Connection card to the E in a P AGS-3389 XTENDER ROCESSOR _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-31...
  • Page 49 PCI Segment 2 PCI Segment 1 Figure 3-44 Example for the numbering in a configuration with an E and a P AGS-3389 XTENDER ROCESSOR _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-32...
  • Page 50: Example Configurations

    In our example all cards can be inserted into one P . A T A in Processor configuration is sufficient ROCESSOR RANS to control the wall. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-33...
  • Page 51 I 9/0 I 4/3 I 5/3 I 6/3 I 7/3 ROCESSOR Figure 3-46 small system in OmniBus configuration _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-34...
  • Page 52 Because all input cards and O fit within the same O , all video windows are freely CALERS movable on the whole display wall. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-35...
  • Page 53 NALOG IDEO Please see also the sections 4.2.1 Basic video display mode 4.2.6 Distributed video. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-36...
  • Page 54 If a video window is moved to the display area O MNI- 1, the window appears with the background color. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-37...
  • Page 55: Starting Up

    The Microsoft Windows product key is labeled on the inside of the front flap of the Processor. When asked for the administrator password, enter barco and reenter it once again. Finally adjust the date and time settings as well as the network settings. After entering the workgroup or computer domain, the system reboots automatically and is from then on ready for normal operation.
  • Page 56: Switching Off

    Simply press the power button on the front of P ROCESSOR If TransForm A is switched off as explained above, not all parts are disconnected from the power supply. To disconnect the whole device the power switches of all OmniBus devices, Extender and Processor must be switched off and all power plugs of the devices have to be pulled out after switching off.
  • Page 57: Operating System

    A system with Windows NT and you want to upgrade the display driver please contact RANS the Barco support, see section Contact! _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-40...
  • Page 58: Configuring

    Drivers (OVS-2686) The Found New Hardware Wizard The Found New Hardware Wizard comes up several times to install newly detected Barco components. The de- tected hardware differs for a Processor or an OmniBus configuration. In an OmniBus configuration the driver for the OmniBus comprises the control for the Barco expansion cards.
  • Page 59 Barco component, it will already show the name of this component correctly in this dialog, any- how you have to run through the wizard. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-42...
  • Page 60 In a Processor configuration, if the Wizard wants to install the driver for an O , specify the following path: CALER c:\BARCO\Windows Drivers (OVS-2686)\Windows Drivers X.X\INF\agx3000.inf\ _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-43...
  • Page 61 Ignore this message and passed the Windows Logo testing. Ignore this message click Yes. and click Continue Anyway. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-44...
  • Page 62 Now the graphics driver gets installed. When the installation is ready, the final dialog of the Found New Hardware Wizzard appears. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-45...
  • Page 63 Every time the Wizard has finished one installation, you will be prompted to reboot. Nevertheless it is not necessary to reboot, so this should be ignored. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-46...
  • Page 64 The next Window shows notes and actual remarks to the release of the display driver and switcher language compiler. Press Next to continue: Figure 3-52 readme _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-47...
  • Page 65 Depending on your demands you can select the features that shall be installed, either the graphics and frame grabber driver or the switcher language compiler or both. Selecting Display driver installs the drivers for Barco’s graphic cards and input cards. Selecting Switcher language compiler installs the switcher language compiler,...
  • Page 66 Figure 3-55 preset information Now all needed information is indicated. If you click Next, the installation will begin: Figure 3-56 start of installation _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-49...
  • Page 67 The system will prompt you to restart the computer. For further configuration you have to reboot now. Therefore click Yes. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-50...
  • Page 68 Apply: The following dialog must be confirmed with Yes. Configuration After the driver installation you can specify the arrangement and the order of the connected Barco projection cubes, projectors or monitors. Refer to section 3.5.2 Configuring the display driver, please! As well you can configure the video switcher.
  • Page 69: Configuring The Display Driver

    The Control Panel dialog box is displayed. Double-click Display for displaying the Display Properties dialog box and click the Settings tab: Figure 3-60 Display Properties – Settings _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-52...
  • Page 70 3. Getting started On the Setting tab, click Advanced... to open the dialog box for the Barco graphic cards properties. Click the Driver Options tab: Figure 3-61 Display Properties – Driver Options UseDeviceBitmaps With this option selected device bitmaps (off-screen video memory) are used.
  • Page 71 Default not selected Effective initially after rebooting Table 3-8 Hardware information Under Hardware Information some information about the hardware configuration is displayed. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-54...
  • Page 72: Configuring The Display Wall

    3. Getting started 3.5.3 Configuring the display wall For configuring the display wall open the dialog box for the Barco graphic cards properties as described in section 3.5.2 Configuring the display driver. Click the Wall Configuration tab. Figure 3-62 Display Properties – Wall Configuration...
  • Page 73 As default the Barco projection cubes and graphic channels are assigned in columns from top to bottom starting with the left column (view from in front of the screens). For the numbering of graphic cards see section 3.2.5...
  • Page 74 1×2 settings The 1×2 settings feature is reserved for future use! Do not use in order to avoid unintended system behavior! _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-57...
  • Page 75: Setting Display Properties

    Click Advanced... to open the dialog box for the Barco graphic cards properties. To select the refresh frequency of an analog monitor click the Monitor tab. In the Monitor Settings box click the desired refresh rate. Click OK to confirm the settings in the Display Properties or the dialog box for the Barco graphic cards proper- ties.
  • Page 76: Optimization

    Windows automatically switches to a software cursor. Therefore use the standard pointer scheme or, if using another pointer scheme, try out if it is correctly displayed over video. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 3-59...
  • Page 77: Operating

    4. Operating 4 Operating This chapter shows the capabilities that T A offers for displaying video and RGB signals. RANS ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 78: Input Cards

    4. Operating 4.1 Input cards For showing information from external sources like video or RGB data on a Barco display wall a set of input cards is provided. For integration of video the Q , the Q SDI V and the S...
  • Page 79: Amount Of Video And Rgb Windows

    *1) SECAM only with Q and S NALOG IDEO TREAMING IDEO *2) Overall configuration has to be considered ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 80 Anyhow also higher bandwidth usage might be possible but the overall configuration should be considered (In case of doubt contact the Barco support; please refer to section Contact.) :...
  • Page 81: Features Of Video And Rgb Display

    TREAMING IDEO RAPHIC RAPHIC can be used as reference signal. For the functionality of genlock, please refer to section 6.1.12 Genlock. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 82: Distributed Video

    The example above shows a simplified OmniBus configuration in order to demonstrate the principles of distrib- uted video. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 83: Displaying Video And Rgb-Signals

    Open video window that will be closed and the video software will /e:<event> be exited when <event> is sent. The same event may be associ- ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 84 Table 4-3 options of video.exe If using the option /c:, take care to indicate the complete absolute or relative path to the configuration file! ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 85 The default configuration files are stored in the folder: \%USERPROFILE%\APPLICATION DATA\Seufert\VideoConf With the factory default settings the variable %USERPROFILE% is: ?:\Documents and Settings\<USER>. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 86: Naming Of Video Channels And Video Sources

    • slc.cfg provides information about used hardware components for the compiler. This file must not be changed. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-10...
  • Page 87 6-15. The number of the input is indicated in square brackets. Grabber "QAVC-1" device=frg3008[0]; Grabber "QAVC-2" device=frg3008[1]; Grabber "QAVC-3" device=frg3008[4]; Grabber "QAVC-4" device=frg3008[5]; Grabber "QAVC-5" device=frg3008[6]; _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-11...
  • Page 88 Sourcelist in quotes, followed by the keyword to and finally the DFRG channel. ROUTES "Sources a" to DVid1; "Sources b" to DVid2; "Sources c" to Vid1; _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-12...
  • Page 89 -f. Then the description of the switcher definition file is adopted to the registry. c:\Program Files\Barco\SLC>slc.exe example.vsw _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-13...
  • Page 90: Displaying Analog Video

    SECAM BW 50Hz (Black and white at 60 frames per second (NTSC)) BW 60Hz Table 4-5 Video dialog box – analog video _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-14...
  • Page 91 Calibration opens the dialog to edit output settings of the O Scaler Settings CALER Table 4-6 Menus in the control panel _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-15...
  • Page 92 Filter (setting with direction keys) Prefilter (setting with direction keys) Increase the selected value <up> Decrease the selected value <down> Set default value <center> _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-16...
  • Page 93 Pixel Format YUV 4:2:2 (16 bpp) or (24 bpp) – should not be selected (only for test purposes) RGB 5:6:5 RGB 8:8:8 _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-17...
  • Page 94: Displaying Streaming Video

    Resize x and y independently Manual Displays the detected video standard. Standard Possible standards: NTSC Table 4-8 Video dialog box – streaming video _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-18...
  • Page 95 Board settings Open the dialog to edit output settings of the O Scaler Settings CALER Table 4-9 Menus in the control panel _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-19...
  • Page 96 <up> Drag down Decrease the selected value <down> Right-click Set default value <center> Table 4-10 Short cuts for controlling the video display _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-20...
  • Page 97 Pressing the Cancel button closes the window, anyhow changes that are already confirmed with the Add or Delete button can not be revoked. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-21...
  • Page 98 As unicast streams are only sent to one single IP address, only one Streaming Video Card at a time is able to display one particular unicast stream. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-22...
  • Page 99 Multiple ports for TCP possible, Startstring: Mavix Mavix – MediaRacer 100 / mpeg4 auto MediaRacer 150 Multiple ports for TCP possible, Startstring: Mavix _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-23...
  • Page 100 SmartSight VideoLAN – VideoLAN (VLC/VLS) mpeg2 – auto – mpeg4 mjpeg For IP protocol multicast, unicast, UDP or RTP is possible. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-24...
  • Page 101 Pixel Format YUV 4:2:2 (16 bpp) or (24 bpp) – should not be selected (only for test purposes) RGB 5:6:5 RGB 8:8:8 _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-25...
  • Page 102: Displaying Digital Video

    Resize x and y independently Manual Displays the detected video standard. Standard Possible standards: NTSC Table 4-13 Video dialog box – digital video _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-26...
  • Page 103 Calibration opens the dialog to edit output settings of the O Scaler Settings CALER Table 4-14 Menus in the control panel _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-27...
  • Page 104 <up> Drag down Decrease the selected value <down> Right-click Set default value <center> Table 4-15 Short cuts for controlling the video display _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-28...
  • Page 105 Pixel Format YUV 4:2:2 (16 bpp) or (24 bpp) – should not be selected (only for test purposes) RGB 5:6:5 RGB 8:8:8 _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-29...
  • Page 106: Displaying Rgb-Signals

    (The names of the presets in the default preset file rgb3010.prs combinations of resolution and refresh rate). _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-30...
  • Page 107: Configuration Of Rgb Input

    In the input list the source names are listed List Source Names Video is resized while the video window is resized Resize immediately _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-31...
  • Page 108 Red (setting with direction keys) Green (setting with direction keys) Blue (setting with direction keys) Reduction (setting with direction keys) Increase the selected value <up> _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-32...
  • Page 109 VCO Range VCO Range Charge Pump Current Charge Pump Current Horizontal Vertical Sync Level HV Level Sync on Green Level SoG Level _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-33...
  • Page 110 Pixel Format RGB 5:6:5 (16 bpp) – Default, optimal bandwidth efficiency RGB 8:8:8 (24 bpp) – high color depth image, but bandwidth demanding _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-34...
  • Page 111 If the monitor signal is not yet displayed in proper quality you have to adjust the pre-configured timing. Figure 4-15 Automatically selected preset has to be adjusted _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-35...
  • Page 112 350 horizontal and vertical lines may appear as wavy lines; a reduction of the PLITTER value of the HV Level will resolve this. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-36...
  • Page 113 Now you can change the desktop to a colorful application and adjust the settings by means of the video dialog box (Red, Green, Blue, Brightness and so on). _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-37...
  • Page 114 Shift while clicking enables one to select several presets. Pressing Contr while clicking deselects the clicked preset. The Select button offers access to the dialog box Select Presets: _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-38...
  • Page 115 (capitalization and small initial letters are taken into account) Table 4-21 No presets can be added to or removed from the Default Presets rgb3010.prs. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-39...
  • Page 116 4.3.1 Display in a window. If using the option /c:, take care to indicate the complete absolute or relative path of the configuration file! _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 4-40...
  • Page 117: Maintenance

    If a maintenance operation is needed that is not mentioned in this chapter, instruct authorized personnel with it! ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 118: Exchange Of Consumables

    As long as the filter pad is not irreversibly blocked, cleaning it with a vacuum cleaner is also an acceptable method to maintain good air ventilation within the system! ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 119: Replacing A Power Module Of Omnibus A12

    Please note: As soon as the defective power module is removed and the remaining two power modules are working well, this LED will also stop to shine. It only indicates if a defective component is in the device. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 120: Cleaning

    Never clean the case of a TransForm A device without first disconnecting all power supply cords! Do not use liquid cleaners or aerosol cleaners! ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 121: Advanced Configuration

    6. Advanced configuration 6 Advanced configuration This chapter provides help for reconfiguring the software of your T RANS ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 122: Advanced Software Configuration

    Open the desired entry by double-clicking its name in the list. If it does not exist yet create an entry with the commands Edit and New. Figure 6-2 Create a new entry in the registry ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 123 Click OK and exit the registry editor unless you want to make further changes to the registry. Unless indicated otherwise all changes will take effect after rebooting. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 124: Registry Reference

    10300 20300 30300 … … table 6-2 ScreenOrder The order in which the Barco projection cubes, projectors or monitors are assigned to the graphic channels of A, is stored as ScreenOrder in the registry. RANS Name ScreenOrder Binary Value Value...
  • Page 125 6. Advanced configuration As default the Barco projection cubes and graphic channels are assigned in columns from top to bottom starting with the left column as shown in Figure 3-63. This assignment may be changed for some reason. E. g., it may be...
  • Page 126 16MB. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 127 Table 6-11 Write combining enables the CPU to transfer images to the graphical boards faster but may cause rendering er- rors under rare conditions. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 128 Set to 1, the display driver offers a single 8 bpp format with a fixed palette containing up to 256 shades of gray (linear or gamma corrected). ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 129: Configuring Video

    If the switcher language compiler is already installed the needed files can be found in the folder: C:\Program Files\BARCO\SLC\ or if not installed to the default folder in the folder indicated during the installation process. Else the switcher language compiler has to be installed, please refer to section 3.5.1 Installing the display driver and...
  • Page 130 Video Switcher serial ROCESSOR ROCESSOR analog input Video/RGB Figure 6-4 Example configuration, using video switcher, multiple computers and distributed video _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-10...
  • Page 131 = rgbhv; Host = server; Port = 4999; Switcher "vsw1" Device = vsw2974[0][1]; Outputs = 12; Videotype = svideo; Port = 5000; _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-11...
  • Page 132 The coding algorithm, currently h263, mjpeg, mpeg2, mpeg4_sp, scn_dec, visiowave is supported. Board mpg3012[0] ipaddress="192.168.0.176"; ipnetmask="255.255.255.0"; ipgateway="192.168.0.1"; codec="mpeg2"; Board mpg3012[1] ipaddress="192.168.0.177"; ipnetmask="255.255.255.0"; ipgateway="192.168.0.1"; codec="mpeg2"; _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-12...
  • Page 133 Grabber "QAVCs-5" device = processor-2:frg3008[4]; device = server:frg3008[10]; Grabber "RGBe-2" Grabber "QAVCs-6" device = processor-2:frg3008[5]; device = server:frg3008[11]; //continued in the next column _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-13...
  • Page 134 "analog video" to server:frg3008[11], server:frg3008[12], server:frg3008[13]; "analog video" to processor-2:frg3008[0], processor-2:frg3008[1]; "analog video" to processor-2:frg3008[2], processor-2:frg3008[3]; "RGB" to RGBs-1, RGBs-2, processor-2:frg3008[4], processor-2:frg3008[5]; _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-14...
  • Page 135 _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-15...
  • Page 136 If multiple Processors are configured, each of them need to be in operation while the compiler is running. The user has to have administrator rights on each of these Processors. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-16...
  • Page 137 ::= listname 'to' (frg_name | frg_dev | dfrg_name ){',' (frg_name | frg_dev | dfrg_name)} ';' cable_def ::= sourcename | sw_output 'to' sw_input | frg_input {',' sw_input | frg_input}';' _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-17...
  • Page 138: Upgrading The Display Driver Under Windows Nt

    Before starting the upgrade make sure, that the appropriate installation files are available. Therefore copy the folder with the latest display driver from the latest CD TransForm A Suite CRS-3045-C to the folder c:\BARCO\Windows Drivers (OVS-2686)
  • Page 139 I can the driver to install. and click Next. choose a specific driver and click Next. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-19...
  • Page 140 X.X\INF\ contains a file agx3281.inf and Drivers agx3000.inf. These files may NOT be selected! When the suitable folder is selected click Next >. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-20...
  • Page 141 Continue Anyway. Now the files get copied and the display driver gets installed. Finally confirm the last dialog with the Finish but- ton. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-21...
  • Page 142 OK and you are ready with the display driver update. It is not necessary to reapply the display properties. On the Driver tab of the Properties dialog, there is now the new driver version indicated. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-22...
  • Page 143: Deinstallation Of The Display Driver (Agxuninst.exe)

    6. Advanced configuration 6.1.6 Deinstallation of the display driver (agxuninst.exe) If the Barco display driver has to be uninstalled, the tool agxuninst.exe should be used. This is necessary if e.g. exchanging AGX G with UGX G or if you want to revert to an earlier version of the...
  • Page 144: Special Requirements When Installing Windows 2000/Xp

    Suite. For this purpose there is an overview on the T A Suite, about which driver should be selected RANS depending on the network card and the used operating system. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-24...
  • Page 145 (Start -> Settings -> Control Panel -> Mouse -> Pointers Tab -> Enable pointer shadow), please refer also to section 3.6.1 Appropriate cursor for video applications for further information on software and hardware cursor. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-25...
  • Page 146: Adjustment Of Language Settings Under Windows Xp

    After clicking OK, the language files get installed. Confirm the completed multilingual installation with OK and reboot the computer by clicking Yes. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-26...
  • Page 147 On the Advanced tab select the intended language also from the list for non-Unicode programs and enable the Default user account settings. When done click the Apply button _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-27...
  • Page 148 6. Advanced configuration Confirm the following two messages with OK and Yes. The new language settings get applied after a restart. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-28...
  • Page 149: Installing Display Drivers For New Cards Or An Omnibus Device

    In a Processor configuration, if inserting multiple new cards click No and just reboot one time manually after the procedure explained above has been run through for all cards. Figure 6-7 system settings change If you inserted graphic cards in TransForm A you have to configure these graphic cards, see section 3.5.2 Configuring the display driver.
  • Page 150: Windows Xp Activation

    (Start -> Accessories –> System Tools –> Activate Windows). You can activate Windows XP via the Internet or telephone depending on your preferences. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-30...
  • Page 151: Redundant Network Adapter

    When the next dialog appears, click Install Drivers. This starts the installation. The installation process is indi- cated by a small window. As soon as it disappears click the Exit button. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-31...
  • Page 152 From the list of devices select Network Adapters. Right click on the entry of an Intel(R) PRO/1000 NT Server Adapter and select Properties from the context menu. This opens the Intel(R) PRO/1000 MT Server Adapter Properties dialog. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-32...
  • Page 153 Next >. Now a list of team modes is displayed. Select the entry Adapter Fault Tolerance and click the Next button. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-33...
  • Page 154 Also the Server Adapter Properties dialog is still open. In the Team list there is now an entry with the new built team. Close also this dialog with OK. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-34...
  • Page 155 Properties dialog opens. On the Settings tab click the Remove Team button. After confirming another dialog the team gets removed and the network cards are again individually available. _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-35...
  • Page 156: Genlock

    Therefore the external signal should be unplugged before switching to an other type of genlock! _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-36...
  • Page 157: Device Explorer

    DEX is running. To regularly syn- chronize (every 5 seconds) the values, select the Async. Update checkbox. Figure 6-9 DEX – Options dialog _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-37...
  • Page 158 3 entries per power module for 3.3V, 5V and 12V Current Reading Current current Temperature of the power module Temperature Reading backplane of AGS-3013/3320 Backplane 3003 IDPROM Version, Firmware _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-38...
  • Page 159 Board 3012 TREAMING IDEO Connector Position (same number as corresponding board 3008), IDPROM Version Table 6-18 DEX - entries of component view _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-39...
  • Page 160 ColorDepth number of available input channels InputChannels number of available output channels OutputChannels Table 6-19 DEX - entries of wall properties _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-40...
  • Page 161 Bandwidth that the input data currently requires on the PCI bus in Bytes/s Bandwidth Table 6-21 DEX - entries of input channels _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-41...
  • Page 162 RANS cation on any other Windows 2000 or Windows XP computer. Therefore insert the CD TransForm A Suite CRS-3045-C into the CD-ROM drive of that computer and browse to the i386 directory of the current graphics driver, e.g. <CDR-drive>:\Windows Driver Suite (OVS-2686)\Windows Driver Suite X.X\i386 By a double click on the file DEX.exe, which is stored in this directory, you can start the DEX.
  • Page 163: Advanced Hardware Configuration

    Video windows which are already present from previous O vices are marked white. System requirements • need to be of the type or newer CALERS AGX-3313-0 _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-43...
  • Page 164 CALERS as a standard system, please refer to section Operating. Distributed video may not be used with a cascaded OmniScaler setup! _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 6-44...
  • Page 165: Technical Appendix

    7. Technical appendix 7 Technical appendix This chapter provides tabular overviews about the technical details of T A, its components and of their RANS interfaces. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 166: Technical Data

    0° .. 40° C at max. 80% humidity, non condensing operating conditions 13 PCI slots for expansion cards Interfaces 1 slot for connecting to the P ROCESSOR Table 7-4 ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 167 ISA retainer and front plate 352.18 mm ×121.92 mm 250 gr weight 1 64/32bit, Dual Voltage Signaling PCI edge connector plugs 1 Dual-DVI connector in, 1 Dual-DVI connector out Table 7-6 ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 168 480 g Weight 1 x 64 bit, 3.3 V/5 V PCI edge connector connectors 2 × RJ45 connector 8-pin for redundant connection Table 7-7 ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 169 1 x 64 bit, 3.3 V/5 V PCI edge connector connectors 4 x BNC, 1 x RJ45 connector 10-pins (not used) Table 7-9 ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 170 425 g weight 1 x 64 bit, 3,3/5 V PCI edge connector connectors 2 x 15-pin SubMinD HD connector, VGA compatible Table 7-10 ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 171 1712 1280 16670 [1280x800@60Hz] 1800 1280 1000 16670 [1280x900@70Hz] 1800 1280 1000 16666 [1280x960@60Hz] 1728 1280 14286 [1280x960@70Hz] 1686 1280 1000 13333 [1280x960@75Hz] ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 172 1536 22222 [2048x1536@45Hz] 2800 2048 1589 1536 16680 [2048x1536@60Hz] 2816 2048 1595 1536 15152 [2048x1536@66Hz] 2804 2048 2114 2046 22222 [2048x2048@45Hz] Table 7-11 ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 173: Interfaces

    1 - green 1 - Data1- 1 - Data0- 1 - red 1 - Data1+ 1 - Data0+ Figure 7-1 Dual-DVI connector digital/analog out ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 174 Dual-DVI to 2xCRT adapter cable red GND green green GND DDC data blue blue GND Hsync +5V Power Vsync DDC clock Figure 7-3 CRT connector _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 7-10...
  • Page 175 0 - Clock+ 0 - Data2+ 0 - Data1- 0 - Data0- 0 - Data1+ 0 - Data0+ Table 7-12 Dual-DVI connector digital in _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 7-11...
  • Page 176 1 - Clock+ 1 - Data2+ 1 - Data1- 1 - Data0- 1 - Data1+ 1 - Data0+ Figure 7-4 Dual-DVI connector digital out _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 7-12...
  • Page 177 Streaming Video Card Figure 7-6 RJ-45 connector, Streaming video card Quad SDI Video Card Signal Shield Figure 7-7 BNC connector, Q SDI V IDEO _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 7-13...
  • Page 178 GND H/C SYNC VSYNC sync GND sync GND Figure 7-8 PS/2 keyboard and PS/2 mouse data clock Figure 7-9 COM1 Figure 7-10 _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 7-14...
  • Page 179 For complete cabling details, please refer to the IEEE802.3 specification, section 8.4, Coaxial Cables and Electrical Parameters. TD– RD– Figure 7-12 RJ-45 connector pin assignments _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 7-15...
  • Page 180 23 and 10 24 and 11 25 and 12 Shield connected Shield connected to plug housing to plug housing Ferrit Ferrit Figure 7-13 _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 7-16...
  • Page 181: Order Codes

    : Dual-DVI to Dual-DVI cable CBL-3264-0 SDI V SDI-3346-0 IDEO MPG-3345-0 TREAMING IDEO with video breakout cable 8×BNC FRG-3292-0 NALOG IDEO CBL-3352-0 RGB I RGB-3293-0 NPUT _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 7-17...
  • Page 182 DVI-D <–> DVI-D, max. UXGA, 5 m CBL-3206-2 DVI-D <–> DVI-D, max. XGA, 10 m CBL-3206-3 DVI-D –> DVI-D optical, max. UXGA, 10 m CBL-3309-0 _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 7-18...
  • Page 183 Driver license per graphic channel of UGX G LIC-3291-2 RAPHIC Windows 2000 Professional OEM license, English EOS-3098-1 Windows XP Professional license, multilingual LIC-3348-0 Table 7-13 _______________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006 7-19...
  • Page 184: Trouble Shooting

    Press <F1> to resume or <F2> for setup. appears on the display tem operation. Press <F1> or disable the option "Halt on all errors" in the BIOS setup. ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 185: Other Faults

    Medium (16 bit) 24 bit High (24 bit) 32 bit True Color (32bit) Highest (32 bit) Table 8-1 color depth dependant on operating system ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 186: Contact

    Feel free to contact us if you have any further questions! • Barco N.V. Projection Systems - Europe Noordlaan 5, B-8520 Kuurne Phone: +32-56-36 82 82, Fax: +32-56-368-251 E-mail: support.controlrooms@barco.com, Web: www.barcocontrolrooms.com ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 187: Index

    ............3-55 Hsync..............3-24 distributed video input card..............4-2 configuring ............6-9 installation features ...............4-6 additional components ........6-29 DLP™................2-2 operating system ..........6-24 ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 188 ..............3-23 order codes............7-17 properties ............4-2 OverView ..............2-2 technical data ............. 7-5 PAL..............4-2, 4-3 RAID ................ 3-2 PanelResolutionOnly..........6-7 red gamma ............. 6-8 ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...
  • Page 189 ..........3-54, 6-7 switcher..............6-11 Y................3-21 switcher definition file..........6-9 Y/C ................ 3-21 compiler.............6-16 zoom ........4-16, 4-20, 4-28, 4-32 switcher definition language .......6-17 ________________________________________________________________ Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006...

Table of Contents