Barco Media Server XHD-Series Safety Guide Declaration of Conformity Manufacturer's Name: Barco Lighting Systems Inc. Manufacturer's Address: 2105 Gracy Farms Lane Austin, Texas 78758 USA Distributor's Name: Barco Lighting Systems Inc. Distributor's Address: 2105 Gracy Farms Lane Austin, Texas 78758 USA...
Barco Media Server XHD-Series Safety Guide Table of Contents Revision history ..................vii 1: Safety ....................9 1.1 General safety ................9 1.1.1 Available system documentation ........9 1.1.2 Box content ..............9 1.1.3 Disconnect device ............10 1.2 Standards and safety ..............10 1.2.1 General safety instructions ..........
Barco Media Server XHD-Series Safety Guide List of Figures 1.1 NEMA 5-15 plug ................. 13 1.2 EFUP logo ..................19 Barco Pn: 60600319...
Read this guide attentively; it contains important information to prevent personal injury while using the Barco Media Server. It also includes several cautions to prevent damage to the Barco Media Server. Ensure that you understand and follow all safety guidelines, safety instructions, and warnings in this guide before using your Barco Media Server.
3 and 4. The USB System Restore drive contains the user guide and the recovery software. To restore the system using the USB System Restore drive, see the Restore section of the Barco Media Server XHD-Series User Guide. 1.1.3 Disconnect device...
—immunity: EN55022/CISPR22 Class A ITE (Information Technology Equipment) Barco Media Servers are products of class A ITE. ITE stands for Information Technology Equipment. ITE is subdivided into two categories denoted class B ITE (products intended primarily for use in domestic environment) and class A ITE (all other ITE which satisfies the class A ITE limits but not the class B ITE limits).
Observe all warnings and instructions printed on the devices! Barco Media Servers do not require any maintenance work or servicing. Servicing should never be carried out by unauthorized personnel! Never open the case of the unit without first disconnecting the power...
Page 13
Section 1: Safety Barco Media Server XHD-Series Safety Guide Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electrical shock.
1.2.4 Additional information Servicing Barco Media Servers do not require any servicing or regular maintenance work. Cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.
1.3.3 Environment Do not install a Barco Media Server in a site near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, or humidity. Be aware that room heat rises to the ceiling; check that temperature near the installation site is not excessive.
For more information about recycling of this product, please contact your local city office or your municipal waste disposal service. For details, please visit the Barco website at: http://www.barco.com/en/AboutBarco/weee. 1.4.2...
“Electronic Information Products Pollution Control Labeling Standard” of Chinese Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. The number inside the EFUP logo that Barco uses (see the figure) is based on the “Standard of Electronic Information Products Environmental Friendly Use Period” of Chinese Mainland.