Barco TransForm A User Manual page 135

CABLES
The section CABLES defines the connection of analog sources to the input on the input cards. If a video switcher
is used this is assigned in two steps, one line for the connection of a source to the video switcher input and an
other line for the connection of an output of the video switcher to an input of an input card.
The first entry in a line indicates the origin of the signal, this is either the source or an output of the video
switcher followed by the expression to and finally followed by the destination, which is a distinct input socket of
the video switcher or of an input card.
video source Name of the video source as entered in section Sourcelist in quotes.
video Name of the video switcher as defined in section Switcher and the socket number. Number-
switcher ing begins with 1. Name and number are separated by a point.
input card Name of the input as defined in
the computer has to be prefixed. Separator after the computer name is a colon. Instead the
user defined name from section Grabber can be used! Appended to the input name, sepa-
rated by a point the connected port must be identified (this is with the used cards always 1).
If a source is connected to more destinations, the destinations can be listed one behind the other, separated by a
comma or for each connection a single line.
CABLES
{
"laptop"
"computer"
"RTL"
"SAT-1"
vsw0.1
vsw0.2
vsw0.3
vsw0.4
vsw1.1
vsw1.2
vsw1.3
vsw1.4
vsw1.5
vsw1.6
vsw1.7
vsw1.8
vsw1.9
vsw1.10
vsw1.11
vsw1.12
}
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
to vsw0.2;
to vsw0.1;
to vsw0.3;
to vsw0.4;
to RGBs-1.1;
to RGBs-2.1;
to RGBe-1.1;
to RGBe-2.1;
to server:frg3008[0].1;
to server:frg3008[1].1;
to server:frg3008[2].1;
to server:frg3008[3].1;
to server:frg3008[10].1;
to server:frg3008[11].1;
to server:frg3008[12].1;
to server:frg3008[13].1;
to processor-2:frg3008[0].1;
to processor-2:frg3008[1].1;
to processor-2:frg3008[2].1;
to processor-2:frg3008[3].1;
Table 6-15. If there are any computers defined, the name of
_______________________________________________________________
6. Advanced configuration
6-15