Barco TransForm A User Manual page 20

The SATA hard disk for
mounting the hard disk unintentionally.
While turning the lock it is easily possible to un-mount the hard disk. Therefore only turn
the lock if the P
Each RAID 5 hard disk provides three LED's at the front of the removable frame. If the red LED lightens perma-
nently, this indicates that this particular hard disk has failed and should be replaced.
The extensive documentation of the LED codes can be found on the documentation CD.
Please note for RAID 5 systems:
Never remove more than one hard disk while the system is running. Otherwise the system
will crash and it can not be restored!
Never remove any hard disk while the system is in rebuilt mode. Otherwise the system will
crash and not be able to be restored!
A hard disk is already switched off by turning the frame lock key!
Never change the sequential order of the hard disks. Otherwise the complete data on the
drives will get corrupt and it can not be restored!
The SATA RAID 1 hard disk drive system looks similar, but has instead of the hard disk in the middle position a
row of eight indicators, which display the different operating modes of the system.
The extensive documentation of the LED codes can be found on the documentation CD.
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
or has on its left side of the front a lock, which prevents from un-
AGS-3389 AGS-3390
is switched off.
ROCESSOR
RAID 1 SATA hard disk drives
________________________________________________________________
3. Getting started
Figure 3-2
SATA hard disk
Figure 3-3
RAID 5 hard disk drives
Figure 3-4
3-3