Barco TransForm A User Manual page 134

DFRG
Each section beginning with DFRG defines the members of a group of distributed video and assigns this group a
user accessible name. The input cards listed in this section are separated with comma.
DFRG The name inserted in quotes is the user accessible name. The name dfrgX with X as an inte-
ger will cause a warning because of potential conflicts with automatically named devices.
Input device Name of input cards as defined in
fined, the name of the computer has to be prefixed. Separator after the computer name is a
colon. Instead the user defined name from section Grabber can be used!
DFRG "DVid-1"
{
QAVCs-1, QAVCs-5;
}
DFRG "DVid-2"
{
server:frg3008[4], server:frg3008[14];
}
Sourcelist
Each section beginning with Sourcelist defines a group of video sources and assigns this group a user accessible
name. Source names in a sourcelist must be unique, but each source can be used several times, with the same
video type and preset.
Sourcelist The name inserted in quotes is the user accessible name
"name" Assigns a video source a name. The video sources are listed in the order they are connected to
the video switcher.
video type Assigns a video type to the video source. See section Switcher for definition of video types.
preset Optional. Assigns a preset to a video source. This overwrites autodetection. NTSC, PAL, SECAM,
BW50 and BW60 are possible presets.
Sourcelist "analog video"
{
"RTL", Composite, PAL;
"SAT 1", SVideo, PAL;
}
Sourcelist "RGB"
{
"laptop", rgb;
"computer", rgbhv;
}
ROUTES
The section ROUTES defines the routing of source lists to groups of distributed video or single video channels. The
first entry in each line marks the source list; the last expression marks the routed video channel or distributed
video. Several video channels or distributed videos can be listed, separated with a comma. Several lists can be
routed to one video channel. The name of the video channel can be used as defined in
computers defined, the name of the computer has to be prefixed. Separator after the computer name is a colon.
Instead the user defined name from section Grabber can be used. For distributed video the name defined in the
DFRG section can be used!
ROUTES
{
"analog video" to DVid-1;
"analog video" to QAVCs-2, QAVCs-3, QAVCs-4;
"analog video" to server:frg3008[11], server:frg3008[12], server:frg3008[13];
"analog video" to processor-2:frg3008[0], processor-2:frg3008[1];
"analog video" to processor-2:frg3008[2], processor-2:frg3008[3];
"RGB" to RGBs-1, RGBs-2, processor-2:frg3008[4], processor-2:frg3008[5];
}
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
Table 6-15 and text above. If there are any computers de-
// defining video sources
// defining RGB sources
6. Advanced configuration
Table 6-15. If there are any
_______________________________________________________________
6-14