Quad Analog Video Card - Barco TransForm A User Manual

3.2.7 Quad Analog Video Card

The Q A V C
UAD NALOG IDEO ARD
video signals are digitized for further processing in T
be processed simultaneously.
Standard
The video standards S-Video (S-VHS, Y/C) and Composite Video (VHS, FBAS, CVBS, CVS, Y) are supported.
Connectors
The Q A V C
UAD NALOG IDEO
C package a video breakout cable is included. The breakout cable itself provides eight BNC connectors that can
ARD
be used to connect four S-Video or composite signals. The eight cables are marked with CVBS/Y 1 to 4 or with
C 1 to 4 respectively, please refer to section
Order
Within a single Q A
UAD NALOG
order in that the input cards are inserted into T
•
In an OmniBus configuration the input cards are plugged into the PCI slots of the O
refer to section 3.2.14
•
In a Processor configuration the input cards are inserted into the PCI slots following the O
more than one input card is built-in, they are numbered in the sequence of the PCI slots, please refer to sec-
tion 3.2.15 Extender.
Specifications
For detailed technical specifications of the Q
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
provides the capability of displaying video signals like VCR, TV, CCTV etc. The analog
provides one LFH-160 pin connector for video insertion. In every Q
ARD
7.2 Interfaces
V C the numbering of the video channels is as shown in the figure above. The
IDEO ARD
RANS
OmniBus.
A
UAD
F A. Four video signals per Q
RANS ORM
for appropriate signal connection.
connector of the Q A
UAD NALOG
F A is as follows:
ORM
V C please refer to section
NALOG IDEO ARD
_______________________________________________________________
3. Getting started
A
UAD NALOG
UAD
V C (left) and video breakout cable (right)
IDEO ARD
B devices, please
MNI US
S
MNI
7.1 Technical
V C can
IDEO ARD
A V
NALOG IDEO
Figure 3-28
. If
CALERS
data.
3-21