Trouble Shooting; Transform A Not Booting - Barco TransForm A User Manual

8 Trouble shooting

8.1 TransForm A not booting

When T F A is not booting properly it is important to state at which point of the boot process a fault oc-
RANS ORM
curs. The display while booting is as follows, so you can see where the process is stopped.
On the first display (board 1/port 0, see section
M3 PCI 128b
DDCinfo: Native DFC resolution is 1024x768@68Hz
ARGUS AGX-3000
VGA BIOS-3000-04
PCX-3000[0] -> MIPS RAM Base: $F000000 -> Number of VGAs: 0
PCX-3000[1] -> MIPS RAM Base: $E600000 -> Number of VGAs: 6 (PGA inside)
Total amount of VGAs: 6
Scan system for AGX-3000
Dev BP Bus Slot
=== == === ====
0 1 3 0 init...
1 1 3 1 init...
2 1 8 0 init...
3 1 8 1 init...
4 1 11 0 init...
5 1 11 1 init...
The other displays show their respective bus and slot no., e. g.:
M3 PCI 128b
ARGUS AGX-3000
VGA BIOS-3000-04
Dev: 1, BP: 1,
DDCinfo: Native DFP resolution is 1024x768@68Hz
fault
boot process is aborted while
Dev BP Bus Slot
=== == === ====
0 1 3 0 init...
/$0000B401/$48640000
1 1 3 1 init...
/$0000B401/$48644000
etc. is displayed.
boot process is aborted,
CMOS checksum error
appears on the display
boot process is aborted,
This PC has no hard disk or hard disk
is unreadable. SYSTEM HALTED
appears on the display
boot process is aborted,
Unable to read system configuration
Press <F1> to resume or <F2> for setup.
appears on the display
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
3.2.5 Graphic
06.08.02 COPYRIGHT © 2002 BARCO Control Rooms
BAs: $1C000008/$0000B401/$48640000
BAs: $20000008/$0000B401/$48644000
BAs: $2C000008/$0000B401/$48720000
BAs: $30000008/$0000B401/$48724000
BAs: $38000008/$0000B401/$48C40000
BAs: $3C000008/$0000B401/$48C44000
06.08.02 COPYRIGHT © 2002 BARCO Control Rooms
PCI Bus: 3, Slot: 1 BAs: $20000008/$0000B401/$48644000
cause/steps
There is probably a problem with the graphic cards. Ask an
authorized person to make sure that all graphic cards are
inserted correctly.
If the fault remains, contact Barco, please.
BAs: $1C000008
done PGA
BAs: $20000008
done
The battery is empty. Ask an authorized person to replace it
by a fresh one.
Check the removable frame of the hard disk drive, if it is
inserted properly and locked. If the error message remains
after restarting T
In some Processor configurations with the P
the BIOS has problems to allocate system resources during
BIOS initialization. Usually this does not impair normal sys-
tem operation. Press <F1> or disable the option "Halt on
all errors" in the BIOS setup.
cards):
done PGA
done
done
done
done
done
F A, contact Barco, please.
RANS ORM
________________________________________________________________
8. Trouble shooting
ROCESSOR AGS-3390
8-1