Setting Display Properties - Barco TransForm A User Manual

3.5.4 Setting display properties

Setting of desktop area and refresh frequency is available for graphic cards in analog mode
only!
If you have not yet restarted your T
to restart it before setting the display properties.
For setting the display properties, open the Display Properties dialog box as described in section
the display driver. Click the Settings tab. Move the slider in the Screen area box to select the appropriate resolu-
tion of your display wall.
Click Advanced... to open the dialog box for the Barco graphic cards properties. To select the refresh frequency
of an analog monitor click the Monitor tab. In the Monitor Settings box click the desired refresh rate.
Click OK to confirm the settings in the Display Properties or the dialog box for the Barco graphic cards proper-
ties.
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
F A since installing the display driver, you have
RANS ORM
_______________________________________________________________
3. Getting started
3.5.2 Configuring
Figure 3-66
Settings tab (left) and Monitor tab (right)
3-58