Configuring The Display Wall - Barco TransForm A User Manual

3.5.3 Configuring the display wall

For configuring the display wall open the dialog box for the Barco graphic cards properties as described in section
3.5.2 Configuring the display
Display modules arrangement
In the Display modules arrangement section configure your display wall by entering the number of columns
into the Columns box and the number of rows into the Rows box. The configuration is interactively displayed
below.
Either indicate the Cols and Rows number by clicking the arrows beneath the number or if
entering the values with the keyboard, press the Enter key to submit the values.
Press Apply, when you have entered the rows and columns. The system prompts you again to reboot. Confirm
the dialog with Yes.
After reboot open again the Display Properties dialog and check that an appropriate color depth (Highest (32
bit)) and resolution (the overall resolution of the whole display wall) is selected. Therewith the system is ready
for further configuration, e.g for assignment of the graphic channels.
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
driver. Click the Wall Configuration tab.
Display Properties – Wall Configuration
_______________________________________________________________
3. Getting started
Figure 3-62
3-55