Registry Reference - Barco TransForm A User Manual

6.1.2 Registry reference

ScreenGeometry
The ScreenGeometry value determines the arrangement of the connected Barco projection cubes, projectors
or monitors.
Name
ScreenGeometry
Typ DWORD
Value XXYY00 hex, XX = 0..FF, YY = 0..FF
Default 0
Effective after rebooting
The leading 0x declares the number to be hexadecimal, the following digits are divided in three groups:
<(XXX)X> <YY> <..>. The first group determines the number of modules in horizontal direction X, the sec-
ond one gives the number in vertical direction Y, the third has to be 00. Only the number of modules exceeding
a 1×1 arrangement is taken into account. Thus an arrangement of 3×2 modules (3 rows, 2 lines) is written as:
00020100. The leading zeroes however are skipped: 20100.
The following table lists examples for some arrangements:
lines rows
1
1
00000
2
00100
3
00200
4
00300
...
ScreenOrder
The order in which the Barco projection cubes, projectors or monitors are assigned to the graphic channels of
T F A, is stored as ScreenOrder in the registry.
RANS ORM
Name
ScreenOrder
Typ Binary Value
Value binary string with up to 256 bytes
Default
000102..FF
Effective after setting display properties or after rebooting
The ScreenOrder value data are divided in pairs: <AA><BB><CC><DD>.... The first pair specifies which chan-
nel is assigned to the first projection cube, the second pair specifies which channel is assigned to the second
projection cube and so on. The projection cubes are counted starting with zero.
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
2 3
10000 20000
10100 20100
10200 20200
10300 20300
6. Advanced configuration
4
30000
30100
30200
30300
________________________________________________________________
Table 6-1
...
...
table 6-2
Table 6-3
6-4