Barco TransForm A User Manual page 88

DFRG
In the section DFRG the names of the video channels are defined. These names can be used to start a video
channel with the video software. Within one DFRG section one single card for basic video display mode can be
listed (e.g. Vid1), or multiple card of different O
DVid1, DVid2).
DFRG "DVid1"
{
QAVC-1, QAVC-3;
}
DFRG "DVid2"
{
QAVC-2, QAVC-4;
}
DFRG "Vid1"
{
QAVC-5;
}
Sourcelist
In the section Sourcelist all used sources are listed. In each of the lines there is the name in quotes, followed by
the video type and the video standard. It is possible to have multiple Sourcelists, nevertheless it is necessary to
have at least one of them.
The Sourcelist serves to assign their sources in the section ROUTES to the DFRG channels.
Sourcelist "Sources a"
{
"RTL", Composite, PAL;
}
Sourcelist "Sources b"
{
"SAT 1", SVideo, PAL;
}
ROUTES
In the section ROUTES is defined, which Sourcelist is available for which video channels (DFRG). In each line
there is first mentioned the Sourcelist in quotes, followed by the keyword to and finally the DFRG channel.
ROUTES
{
"Sources a" to DVid1;
"Sources b" to DVid2;
"Sources c" to Vid1;
}
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
B devices can be listed to form a distributed video (e.g.
MNI US
// define dfrg device with members
// defining video sources
_______________________________________________________________
4. Operating
4-12