Barco TransForm A User Manual page 73

The assignment made through this dialog must correspond to the physical cabling between
the graphic cards or OmniScalers and the projection modules to produce a consistent picture
of the complete desktop.
As default the Barco projection cubes and graphic channels are assigned in columns from top to bottom starting
with the left column (view from in front of the screens). For the numbering of graphic cards see section
Graphic cards and section
This assignment may be changed for some reason. E. g., it may be advantageous to change the order thus, that
the channels are assigned in rows instead of columns. For this assignment of projection cubes to graphic chan-
nels, see as well the example in the figure below, you can select Rows in the Order box.
For a freely defined order select User defined instead. Then you can assign interactively each projection cube to
its corresponding graphic channel. This is especially helpful, if graphic cards are plugged into multiple O
devices.
After pressing the Reorder button, one graphic channel after the other is highlighted on the display wall. In the
picture of the display wall in the Display Properties dialog box do a left click on the corresponding graphic
channel at the same position. After assigning all graphic channels a dialog box appears. Confirming the question
'Apply changes now?' with Yes causes the wall to be reordered immediately.
Especially for distributed video, see section
essary to meet the specific needs with respect to PCI segmentation and projection cube assignment.
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
3.2.14 OmniBus, please.
4.2.6 Distributed
Alternate assignment of graphic channels
video, a reassignment as explained above can be nec-
_______________________________________________________________
3. Getting started
3.2.5
Figure 3-63
Default order of projection cubes
Figure 3-64
B
MNI
Figure 3-65
Screen order
3-56
US