Barco TransForm A User Manual page 87

Example for the setup of the switcher definition file
The switcher definition file consists of multiple sections. Depending on the described system some sections can
be left out or must be used. Parts that are not used can as well be commented by means of the /* and */ char-
acters at the beginning, respectively end of the commented part. Twice a slash // comments all characters to its
right in the same line.
Here a simple example is given to explain the switcher definition file. It consists of a T
configuration with two Q
of a card are grouped with the respective channels of the other card to show distributed video. One card displays
with the third channel an additional video window. For this configuration the following sections are used:
•
Grabber
To each used input of the Q
•
DFRG
One or multiple Grabber get a name as video channel.
•
Sourcelist
All analog sources get a name and their video- / RGB-type gets defined. The sources get combined to
groups, the Sourcelists.
•
Route
Here it is determined which Sourcelist must be available at which input cards (Grabber) or DFRG.
•
Cables
This section describes the cabling of each source to the individual inputs of each input card.
Grabber
To the video inputs of the Q
Grabber sections. The grabber name (here QAVC-x) can be chosen freely unless it does not start with a digit or is
a default name of the system (frg0, frg1, ...). After the keyword device= the respective card is written. A
list with the identifiers can be found in
Grabber "QAVC-1"
{
device=frg3008[0];
}
Grabber "QAVC-2"
{
device=frg3008[1];
}
Grabber "QAVC-3"
{
device=frg3008[4];
}
Grabber "QAVC-4"
{
device=frg3008[5];
}
Grabber "QAVC-5"
{
device=frg3008[6];
}
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
A V C . They are located in two different O
UAD NALOG IDEO ARDS
A V C
UAD NALOG IDEO ARDS
A V C
UAD NALOG IDEO ARD
Table 6-15. The number of the input is indicated in square brackets.
an individual name is assigned.
we assign the names QAVC-1, QAVC-2, ... , QAVC-5 in the five
_______________________________________________________________
4. Operating
F A in OmniBus
RANS ORM
B devices. Two channels
MNI US
4-11