Switching Off - Barco TransForm A User Manual

Normal system start
The Windows operating system starts automatically. Please, refer to section
The system is pre-configured at the factory with an administrator account and a password.
User name administrator
Password barco

3.3.3 Switching off

Always shut down the Windows operating system, before switching off your TransForm A.
Click the Start button on the taskbar and choose Shut Down ... to display the Shut down Windows dialog box:
Select Shut down and click OK. After some seconds a message appears that you can switch off your computer
safely. Simply press the power button on the front of P
If TransForm A is switched off as explained above, not all parts are disconnected from the
power supply. To disconnect the whole device the power switches of all OmniBus devices,
Extender and Processor must be switched off and all power plugs of the devices have to be
pulled out after switching off.
Barco – TransForm A - Workstation for Windows – DOC-3266-2 – Revision 13 – April 2006
3.4 Operating
.
ROCESSOR
_______________________________________________________________
3. Getting started
system!
Figure 3-50
shut down dialog for Windows 2000/XP
Table 3-1
3-39